NextSDS Logo
Safety Data Sheet EN

Industriereiniger L.S.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Industriereiniger L.S.
Product Form
Mixture
Product Code
5701.0_99999RI40

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaner Floor cleaner. Alkaline cleaner. Cleaning/washing agents and additives

Uses advised against

No additional information available

Manufacturers & Suppliers

H

Helichem B.V.

manufacturer

Kozakkenberg 5, NL-5951 DL Belfeld - Nederland

Emergency Contacts

National Poisons Information Service (Birmingham Centre) City Hospital

0844 892 0111

Monday to Friday, 08.00 to 18.00 hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1A H314
Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H314 Causes severe skin burns and eye damage

Precautionary Statements

P102 Keep out of reach of children
P280 Wear eye protection, protective gloves
P301 + P330 + P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting
P303 + P361 + P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
P310 Immediately call a POISON CENTER or doctor/physician
P405 Store locked up
P501 Dispose of contents/container to Waste treatment, Chemical refuse

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
2-butoxyethanol EC: 203-905-0 111-76-2 1 - 5% Yes
Alcohol(C9-11)EO(5-15) 68439-46-3 1 - 5% Yes
Potassiumcocoate EC: 263-049-9 61789-30-8 1 - 5% Yes
Sodiumoctylsulfate EC: 204-812-8 126-92-1 1 - 5% Yes
Disodium metasilicate EC: 229-912-9 6834-92-0 1 - 5% Yes
Potassium hydroxide EC: 215-181-3 1310-58-3 0.1 - 1% Yes
trisodium nitrilotriacetate EC: 225-768-6 5064-31-3 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or doctor/physician.

Symptoms: Soar throat. Cough. Shortness of breath. Difficulty in breathing.

Skin contact

Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Immediately call a POISON CENTER or doctor/physician.

Symptoms: Burns. Redness, pain.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician.

Symptoms: Blurred vision. Burning sensation. Tears. Redness, pain. Causes serious eye damage.

Ingestion

Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER or doctor/physician.

Symptoms: May cause burns or irritation of the linings of the mouth, throat, and gastrointestinal tract.

Immediate Medical Attention

In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam. Dry powder. Carbon dioxide. Water spray. Sand.

Unsuitable media

Do not use a heavy water stream.

Specific hazards

Fire hazard: Not combustible.

Instructions

Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel. Ventilate area.

Small spill

Small quantities of liquid spill: take up in non-combustible absorbent material and shovel into container for disposal.

Environmental

Do not flush into surface water. Avoid release to the environment.

Cleanup methods

Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Wash away remainder with plenty of water.

Materials: inert solids, such as clay or diatomaceous earth; non-combustible absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Normal precautions for the use of chemicals and cleaners should be taken care of. See information supplied by the manufacturer. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

Storage

Keep only in the original container in a cool, well ventilated place. Keep container tightly closed. Protect from freezing.

Hygiene

Do not eat, drink or smoke when using this product. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Use neoprene or rubber gloves

Eyes

Wear eye/face protection

Respiratory

No special protection required where adequate ventilation is maintained

Skin/Body

If repeated skin contact or contamination of clothing is likely, protective clothing should be worn

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Softening Point
---
Freezing Point
No data available
Auto Ignition Temperature
No data available
Melting Point
No data available
Solubility In Water
---
Flammability
Non flammable
Colour
Purple.
Form
---
Vapor Density
---
Density
1,061 g/cm³ (20°C)
Odor Threshold
No data available
Lower Explosive Limit
No data available
Crystallisation Point
---
Properties Status
---
Physical State Data
liquid
Solidification Point
---
Upper Explosive Limit
No data available
Relative Density
No data available
Solubility
completely soluble.
Colour Intensity
---
Bulk Density
---
Physical State
Liquid
Voc Content
---
Ph
13,3 ± 0.5 (20°C)
Molecular Weight
---
Explosive Limits
---
Boiling Point
> 100
Kinematic Viscosity
No data available
State Under Standard Conditions
---
Evaporation Rate
---
Decomposition Temperature
No data available
Appearance
---
Metal Corrosion
---
Cloud Point
---
Dynamic Viscosity
< 50 mPa.s (20°C)
Partition Coefficient
No data available
Relative Evaporation Rate
No data available
Vapor Pressure
No data available
Odor
perfumed.
Flash Point
> 60 °C
Solubility In Fat
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable at normal handling and storage conditions.

Reactivity

Thermal decomposition generates : Corrosive vapours.

Hazardous reactions

Not established.

Avoid

Direct sunlight. Extremely high or low temperatures.

Incompatible

Strong acids. Aluminium.

Decomposition

fume. Carbon monoxide. Carbon dioxide. Thermal decomposition generates : Corrosive vapours.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3266
Shipping Name
CORROSIVE LIQUID, BASIC, INORGANIC, N.O.S.
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Industriereiniger L.S.?

The signal word is danger.

What is the physical form of Industriereiniger L.S.?

Industriereiniger L.S. is a liquid with purple. color. It has perfumed. odor.

What is the solubility of Industriereiniger L.S.?

completely soluble.

What is Industriereiniger L.S. used for?

Cleaner Floor cleaner. Alkaline cleaner. Cleaning/washing agents and additives

What are the hazard statements for Industriereiniger L.S.?

This substance has 1 hazard statement:

  • H314: Causes severe skin burns and eye damage

What is the melting point of Industriereiniger L.S.?

The melting point is No data available and the boiling point is > 100.