NextSDS Logo
Safety Data Sheet EN

Bupropion Hydrochloride

CAS 31677-93-7

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Bupropion Hydrochloride
Product Code
1078733
Chemical Name
1-Propanone, 1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-, hydrochloride, (+/-)-
Synonyms
Amfebutamone

Regulatory Identifiers

CAS Number
31677-93-7 Check regulations →

Identified Uses

Specified quality tests and assay use only.

Uses advised against

Not for use as a drug. Not for administration to humans or animals.

Manufacturers & Suppliers

U. S. Pharmacopeia logo

U. S. Pharmacopeia

manufacturer

12601 Twinbrook Parkway, Rockville, MD 20852-1790, United States

301-816-8129

http://www.usp.org

Emergency Contacts

CHEMTREC within US & Canada

1-800-424-9300

CHEMTREC outside US & Canada

+1 703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4
Eye Irrit. Cat. 2A

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed.
H319 Causes serious eye irritation.

Precautionary Statements

P264 Wash thoroughly after handling.
P280 Wear eye protection/face protection.
P312 If swallowed: Call a poison center/doctor if you feel unwell.
P330 Rinse mouth.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P338 Remove contact lenses, if present and easy to do.
P338 Continue rinsing.
P351 If in eyes: Rinse cautiously with water for several minutes.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Bupropion Hydrochloride 31677-93-7 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. Call a physician if symptoms develop or persist.

Skin contact

Get medical attention if irritation develops and persists.

Eye contact

Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.

Ingestion

Rinse mouth. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Get medical advice/attention if you feel unwell.

Immediate Medical Attention

Persons developing serious hypersensitivity (anaphylactic) reactions must receive immediate medical attention.

Medical Treatment

Treatment of overdose should be symptomatic and supportive. Administer activated charcoal as a slurry. Perform gastric lavage. Perform aggressive airway management. Monitor vital signs. Monitor ECG. Monitor fluid and electrolyte status. For seizures, administer a benzodiazepine intravenously, followed by phenobarbital or propofol if the seizures recur. Monitor for hypotension, dysrhythmias, respiratory depression, and need for endotracheal intubation. Evaluate for hypoglycemia, electrolyte disturbances, hypoxia. For hypotension, infuse 10- 20 mL/kg isotonic fluid. Administer dopamine or norepinephrine if hypotension persists. For agitation, administer benzodiazepines. Hemodialysis is unlikely to be of benefit.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water. Foam. Dry chemical or CO2. Use fire-extinguishing media appropriate for surrounding materials.

Unsuitable media

None known.

Specific hazards

No unusual fire or explosion hazards noted.

Instructions

Use water spray to cool unopened containers. Use standard firefighting procedures and consider the hazards of other involved materials.

Firefighter Protection

Wear suitable protective equipment. Firefighters should use self-contained breathing equipment and protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep unnecessary personnel away. Wear appropriate personal protective equipment. Avoid inhalation of dust from the spilled material. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation.

Environmental

Avoid discharge into drains, water courses or onto the ground.

Cleanup methods

Sweep up or vacuum up spillage and collect in suitable container for disposal. Clean surface thoroughly to remove residual contamination.

Materials: suitable container

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

As a general rule, when handling USP Reference Standards, avoid all contact and inhalation of dust, mists, and/or vapors associated with the material. Clean equipment and work surfaces with suitable detergent or solvent after use. After removing gloves, wash hands and other exposed skin thoroughly. Select and use containment devices and personal protective equipment based on a risk assessment of material potency and exposure potential.

Storage

Store in tight container as defined in the USP-NF. This material should be handled and stored per label instructions to ensure product integrity.

Hygiene

After removing gloves, wash hands and other exposed skin thoroughly.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

State Under Standard Conditions
---
Colour
White. Off-white.
Properties Status
---
Crystallisation Point
---
Colour Intensity
---
Explosive Limits
---
Vapor Pressure
Not available.
Appearance
White. Off-white.
Freezing Point
---
Voc Content
---
Lower Explosive Limit
---
Auto Ignition Temperature
Not available.
Melting Point
428 - 453.2 °F (220 - 234 °C) (decomposes)
Flammability
---
Odor Threshold
Not available.
Metal Corrosion
---
Density
---
Odor
Odorless. Characteristic.
Physical State
Solid.
Softening Point
---
Bulk Density
---
Solubility In Water
Soluble.
Upper Explosive Limit
---
Kinematic Viscosity
Not available.
Solidification Point
---
Partition Coefficient
1.54
Dynamic Viscosity
Not available.
Molecular Weight
276.2
Boiling Point
Not available.
Form
Powder.
Relative Density
Not available.
Solubility In Fat
---
Decomposition Temperature
Not available.
Physical State Data
solid
Cloud Point
---
Vapor Density
Not available.
Relative Evaporation Rate
---
Evaporation Rate
Not available.
Flash Point
Not available.
Ph
---
Solubility
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Material is stable under normal conditions.

Reactivity

The product is stable and non-reactive under normal conditions of use, storage and transport.

Hazardous reactions

No dangerous reaction known under conditions of normal use.

Avoid

Contact with incompatible materials.

Incompatible

Strong oxidizing agents.

Decomposition

NOx. Cl-. Irritating and/or toxic fumes or gases. Emits toxic fumes under fire conditions.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Bupropion Hydrochloride known by?

Bupropion Hydrochloride is also known as: Amfebutamone

What is the hazard signal word for Bupropion Hydrochloride?

The signal word is warning.

What is the physical form of Bupropion Hydrochloride?

Bupropion Hydrochloride is a solid. appearing as white. off-white. with white. off-white. color. It has odorless. characteristic. odor.

What is Bupropion Hydrochloride used for?

Specified quality tests and assay use only.

What are the hazard statements for Bupropion Hydrochloride?

This substance has 2 hazard statements:

  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.

What is the melting point of Bupropion Hydrochloride?

The melting point is 428 - 453.2 °F (220 - 234 °C) (decomposes) and the boiling point is Not available..