Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TITAN CYTRAC HSY 75W-90
- Product Code
- 600635930
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), Application of the substance / the preparation: Lubricant
Manufacturers & Suppliers
FUCHS LUBRICANTS (UK) PLC.
manufacturer
New Century Street, Hanley, Stoke-on-Trent, Staffordshire, ST1 5HU, UK
Emergency Contacts
Fuchs Lubricants (UK)
01782 203700
NHS Direct
0845 46 47
NHS Direct (Textphone)
0845 606 46 47
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
A blend of synthetic base oils with multifunctional additives
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polysulfides, di-tert-Bu EC: 273-103-3 | 68937-96-2 | 2.5 - 10% | Yes |
| Amine phosphate EC: 931-384-6 | --- | 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Check for and remove any contact lenses. Rinse opened eye for several minutes under running water.
Wash mouth out with water. Seek medical treatment.
Immediate Medical Attention
Seek medical treatment. High pressure injection injuries through the skin require prompt surgical intervention.
Medical Treatment
High pressure injection injuries through the skin require prompt surgical intervention and possibly steroid therapy, to minimise tissue damage and loss of function. Because entry wounds are small and do not reflect the seriousness of the underlying damage, surgical exploration to determine the extent of involvement may be necessary. Prompt surgical decompression, debridement and evacuation of foreign material should be performed under general anaesthetics, and wide exploration is essential.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
Water with full jet
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Particular danger of slipping on leaked/spilled product.
Do not allow to penetrate the ground/soil. Prevent from spreading (e.g. by damming-in or oil barriers). Do not allow to enter sewers/ surface or ground water.
Send for recovery or disposal in suitable receptacles.
Materials: liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent formation of aerosols.
Requirements to be met by storerooms and receptacles: Prevent any seepage into the ground.
Do not heat up to temperatures close to flash point.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. For the permanent contact gloves made of the following materials are suitable: Nitrile rubber, NBR; Neoprene gloves. Not suitable are gloves made of the following materials: Butyl rubber, BR; Natural rubber, NR.
Goggles recommended during refilling
Not required.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
Reactivity
No dangerous reactions known.
No decomposition if used according to specifications.
Strong oxidising agents.
Carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TITAN CYTRAC HSY 75W-90?
The signal word is na: r-phrases.
What is the physical form of TITAN CYTRAC HSY 75W-90?
TITAN CYTRAC HSY 75W-90 is a fluid appearing as fluid with light yellow color. It has characteristic odor.
What is TITAN CYTRAC HSY 75W-90 used for?
SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), Application of the substance / the preparation: Lubricant
What is the melting point of TITAN CYTRAC HSY 75W-90?
The melting point is Undetermined. and the boiling point is Undetermined..