Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TITAN CYTRAC MB SYNTH 75W-90
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
No uses advised against identified.
Manufacturers & Suppliers
FUCHS LUBRICANTS GERMANY GmbH
manufacturer
Friesenheimer Str. 19 68169 Mannheim
+49 621 3701-0
Emergency Contacts
Emergency Contact
+49 621 3701-0
Mo - Fr 08:00 - 16:00 Uhr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of synthetic base oils with additives.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Amine aromatic , alkylated EC: 270-128-1 | --- | 0.1 - 1% | Yes |
| Alkyldithiothiadiazol, long chain EC: 813-543-0 | --- | 0.1 - 1% | Yes |
| ethoxylated amine EC: 246-807-3 | --- | 0.01 - 0.1% | Yes |
| Alkyl dithiophosphate EC: 401-850-9 | --- | 0.25 - 1% | Yes |
| alkylamine EC: 701-175-2 | --- | 0.25 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms.
Wash with soap and water.
Symptoms: skin irritation
Promptly wash eyes with plenty of water while lifting the eye lids.
Symptoms: eye irritation
Rinse mouth thoroughly.
Immediate Medical Attention
Get medical attention if symptoms occur.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, fire extinguishing powder or fog like water spraying. Extinguish larger fires with alcohol resistant foam or spray water with suitable surfactant added
Water with a full water jet.
During fire, gases hazardous to health may be formed.
Move container from fire area if it can be done without risk.
Firefighter Protection
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
In case of spills, beware of slippery floors and surfaces.
Prevent from spreading (e.g. by binding or oil barriers). Avoid release to the environment. Environmental manager must be informed of all major spillages. Prevent further leakage or spillage if safe to do so.
Absorb with liquid-binding material
Materials: sand, diatomite, acidbinders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent formation of aerosols. Do not eat, drink or smoke when working with the product. Take usual precautions when handling mineral oil products or chemical products. Observe good industrial hygiene practices.
Do not heat up to temperatures close to the flash point.
Do not eat, drink or smoke when working with the product. Observe good industrial hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.
Material: Nitrile butyl rubber (NBR). Min. Breakthrough time: >= 480 min Recommended thickness of the material: >= 0,38 mm. Avoid long-term and repeated skin contact. Suitable gloves can be recommended by the glove supplier. Use skin protection cream for preventive skin protection. Protective gloves, where permitted in acc. to safety directions. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Avoid contact with skin and eyes. Goggles/face shield are recommended. If risk of splashing, wear safety goggles or face shield.
Ensure good ventilation/exhaustion at the workplace. Avoid breathing vapour/ aerosol.
Do not carry cleaning cloths impregnated with the product in trouser pockets. Wear suitable protective clothing.
No data available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal use conditions.
Stable under normal use conditions.
Stable under normal use conditions.
Stable under normal use conditions.
Strong oxidizing substances. Strong acids. Strong bases.
Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and Degradability
12.2 Persistence and Degradability
12.2 Persistence and Degradability
12.2 Persistence and Degradability
12.3 Bioaccumulative potential
Not applicable for mixtures
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment:
The product does not contain any substances fulfilling the PBT/vPvB criteria.
12.6 Endocrine disrupting properties
The substance/mixture does not contain components considered to have endocrine disrupting properties at levels of 0.1% or higher.
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in accordance with all applicable regulations.
Dispose in accordance with all applicable regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.(Alkyl dithiophosphate)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TITAN CYTRAC MB SYNTH 75W-90?
The signal word is no signal word.
What is the physical form of TITAN CYTRAC MB SYNTH 75W-90?
TITAN CYTRAC MB SYNTH 75W-90 is a liquid with yellow color. It has characteristic odor.
What is TITAN CYTRAC MB SYNTH 75W-90 used for?
Lubricant
What are the hazard statements for TITAN CYTRAC MB SYNTH 75W-90?
This substance has 1 hazard statement:
- H411: Toxic to aquatic life with long lasting effects.