NextSDS Logo
Safety Data Sheet EN

ROCOL ACID ETCH SOLUTION

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ROCOL ACID ETCH SOLUTION
Product Code
41039

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

R

ROCOL Site Safety Systems Limited

manufacturer

ROCOL House, Swillington, Leeds, West Yorkshire, LS26 8BS, England.

+44 (0) 113 2322800

Emergency Contacts

Emergency Contact

+44 (0) 113 2322600

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H303 Swallowing may have the following effects:- irritation of mouth, throat and digestive tract.
H315 Irritating to eyes, respiratory system and skin.
H315 Repeated or prolonged contact may produce defatting of the skin leading to irritation and dermatitis.
H319 Liquid will cause conjunctival irritation and possibly corneal damage.
H335 Exposure to vapour at high concentrations may have the following effects:- irritation of nose, throat and respiratory tract. Exposures during normal handling and use are likely to be well below those that would be expected to produce the above effects.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
HYDROCHLORIC ACID --- 10 - 25% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove from exposure.

Skin contact

Wash skin with soap and water. Apply a reconditioning skin cream.

Eye contact

Wash out eye with plenty of water.

Ingestion

Wash out mouth with water. Do not induce vomiting.

Immediate Medical Attention

Obtain medical attention urgently (for eye contact and ingestion).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, foam, dry chemical or carbon dioxide.

Unsuitable media

Do not use water jet.

Specific hazards

This product may give rise to hazardous fumes in a fire.

Firefighter Protection

Wear self contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Try to prevent the material from entering drains or water courses.

Cleanup methods

Neutralise with sodium carbonate or bicarbonate. Transfer into suitable containers for recovery or disposal.

Materials: sodium carbonate or bicarbonate

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use in well ventilated area.

Storage

Storage temperature should be controlled to between 5 and 40 °C.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Exposure to this material may be controlled in a number of ways. The measures appropriate for a particular worksite depend on how the material is used and on the potential for exposure. Use of the basic principles of Industrial Hygiene will enable this material to be used safely. During application, adequate ventilation must be provided.

Hands

PVC or rubber gloves.

Eyes

Chemical goggles if there is a risk of splashing.

Respiratory

Respiratory protection if there is a risk of exposure to high vapour concentrations.

Skin/Body

Normal work wear.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Evaporation Rate
---
Partition Coefficient
---
Form
---
Melting Point
---
Colour Intensity
---
Dynamic Viscosity
---
Softening Point
---
Freezing Point
---
Solidification Point
---
Crystallisation Point
---
Upper Explosive Limit
---
Relative Density
---
Physical State
Liquid.
Density
1.04. (measured as kg/litre)
Kinematic Viscosity
Mobile liquid at ambient temperatures.
Flash Point
---
Bulk Density
---
Colour
Colourless.
Explosive Limits
---
Metal Corrosion
---
Flammability
---
Lower Explosive Limit
---
Relative Evaporation Rate
---
Properties Status
---
Molecular Weight
---
Odor
Characteristic.
Solubility In Fat
---
Auto Ignition Temperature
---
Cloud Point
---
Appearance
---
Voc Content
---
Solubility In Water
Completely soluble.
Physical State Data
liquid
Odor Threshold
---
Ph
---
Decomposition Temperature
---
Solubility
---
State Under Standard Conditions
---
Vapor Pressure
---
Vapor Density
Heavier than air.
Boiling Point
approx 100 °C
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Avoid

High temperatures.

Incompatible

Metals such as sodium, potassium and barium. Fine powders of light metals and their alloys such as Al, Mg, Zn, Ti, etc. Alkalis. Strong oxidising agents.

Decomposition

Combustion will generate: hydrogen chloride.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1789
Shipping Name
Hydrochloric acid, solution
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for ROCOL ACID ETCH SOLUTION?

The signal word is warning.

What is the physical form of ROCOL ACID ETCH SOLUTION?

ROCOL ACID ETCH SOLUTION is a liquid. with colourless. color. It has characteristic. odor.

What are the hazard statements for ROCOL ACID ETCH SOLUTION?

This substance has 5 hazard statements:

  • H303: Swallowing may have the following effects:- irritation of mouth, throat and digestive tract.
  • H315: Irritating to eyes, respiratory system and skin.
  • H315: Repeated or prolonged contact may produce defatting of the skin leading to irritation and dermatitis.
  • H319: Liquid will cause conjunctival irritation and possibly corneal damage.
  • H335: Exposure to vapour at high concentrations may have the following effects:- irritation of nose, throat and respiratory tract. Exposures during normal handling and use are likely to be well below those that would be expected to produce the above effects.