Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lincoln Electric Combi-Beits
- Product Code
- 99.00.03
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Metal surface treatment
Manufacturers & Suppliers
Kroon Oil BV
manufacturer
Dollegoorweg 15, NL-7602 EC ALMELO
+0031-(0)546-818165
Emergency Contacts
Emergency Contact
+31 (0)546 818165
9 AM to 4 PM, Monday to Friday
National Poison Information Centre (NVIC)
+31 30 - 2748888
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
Immediately rinse with water. Call a doctor immediately. Rub in Ca-gluconate solution or Ca-gluconate gel immediately.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Do not induce vomiting; call for medical help immediately. Rinse out mouth and then drink plenty of water.
Immediate Medical Attention
Call a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, dry chemical, or foam. Water can be used to cool and protect exposed material.
Water with full jet
During heating or in case of fire poisonous gases are produced. Formation of toxic gases is possible during heating or in case of fire.
Firefighter Protection
Mouth respiratory protective device. Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away.
Dilute with plenty of water.
Absorb with liquid-binding material
Related Products
Similar products with comparable safety profiles
Lincoln® 6013
---
NIC-L-WELD™ 99 ELECTRODE
---
NIC-L-WELD™ 59 ELECTRODE
---
BrazeTec Soldaflux Z
---
WELD-ON C-65
---
TECHNOMELT PW 207 known as POWERWELD 207
---
AlcoTec ALMIGWELD, AlcoTec ALTIGWELD, Aluminum Metallizing Wire, AlumaArc
---
WELD-ON 735 WET 'N FAST
UFI: 04JU-QP88-7S0P-TM3P
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well ventilated areas. Prevent formation of aerosols. Take note of emission threshold. Keep respiratory protective device available.
Keep container tightly sealed.
Keep respiratory protective device available.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear gloves for the protection against chemicals according to EN 374. PVC gloves. Acid resistant gloves. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: For continuous contact we recommend gloves with breakthrough time of more than 240 minutes with preference for > 480 minutes where suitable gloves can be identified. For short-term/splash protection we recommend the same, but recognise that suitable gloves offering this level of protection may not be available and in this case a lower breakthrough time may be acceptable so long as appropriate maintenance and replacement regimes are followed. Glove thickness is not a good predictor of glove resistance to a chemical as it is dependent on the exact composition of the glove material. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Face protection. Tightly sealed goggles (EN 166)
Filter P2. In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Acid resistant protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No further relevant information available.
Reacts with alkaline metals.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2922
- Shipping Name
- CORROSIVE LIQUID, TOXIC, N.O.S. (nitric acid, HYDROGEN FLUORIDE)
- Transport Class
- 8
- Packing Group
- II
Warning: Corrosive substances.
Warning: Corrosive substances. Stowage Category B. SW2 Clear of living quarters.
Warning: Corrosive substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lincoln Electric Combi-Beits?
The signal word is danger.
What is the physical form of Lincoln Electric Combi-Beits?
Lincoln Electric Combi-Beits is a pasty appearing as pasty with red color. It has irritant odor.
What is Lincoln Electric Combi-Beits used for?
Metal surface treatment
What are the hazard statements for Lincoln Electric Combi-Beits?
This substance has 3 hazard statements:
- H290: May be corrosive to metals.
- H301 + H311 + H331: Toxic if swallowed, in contact with skin or if inhaled.
- H314: Causes severe skin burns and eye damage.
What is the melting point of Lincoln Electric Combi-Beits?
The melting point is Undetermined. and the boiling point is 100 °C.