Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BrazeTec Soldaflux Z
- Product Code
- 300000001030
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
soldering
Manufacturers & Suppliers
SAXONIA Technical Materials GmbH
manufacturer
Rodenbacher Chaussee 4, 63457 Hanau, Germany
Emergency Contacts
Poison Center
1 800 222 1222
24HRS
For transport in Europe, Central- and South America, Israel and Africa (Non-Arabic speaking countries)
+32 3 213 15 70
24 hours per day, 7 days per week.
For transport in the Middle East (Israel excluded) & Arabic speaking Africa
+32 3 213 33 79
24 hours per day, 7 days per week.
For transport in the USA and Canada
1-877 986 4267
24 hours per day, 7 days per week.
For transport in Asian and the Pacific (China excluded)
+65 62 64 78 36
24 hours per day, 7 days per week.
For transport in China
(+86) 400 88 71 190
24 hours per day, 7 days per week.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| zinc chloride | 7646-85-7 | 90% | Yes |
| ammoniumchloride | 12125-02-9 | 15% | Yes |
| hydrochloric acid | 7647-01-0 | 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, call a physician. If unconscious, place in recovery position and get medical attention immediately.
Symptoms: Shortness of breath, Asthma
Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty. Wash contaminated clothing before reuse. If on skin, rinse well with water. If on clothes, remove clothes.
Symptoms: Burn, corrosive effects, Redness
Remove contact lenses. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness. Excessive lachrymation.
Clean mouth with water and drink afterwards plenty of water. Keep respiratory tract clear. Do NOT induce vomiting. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital.
Symptoms: Stomach/intestinal disorders
Immediate Medical Attention
Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty. Take victim immediately to hospital.
Medical Treatment
Consult a physician. Take victim immediately to hospital.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.
Soak up with inert absorbent material.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Worthington Silver Brazing Flux
---
Metaflux 70-45 Zinc-Spray
---
Metaflux 70-45 Zinc-Spray
---
NO CLEAN SOLDER FLUXES
---
AlcoTec ALMIGWELD, AlcoTec ALTIGWELD, Aluminum Metallizing Wire, AlumaArc
---
Quellschweißmittel Koramic THF
---
NIC-L-WELD™ 59 ELECTRODE
---
NIC-L-WELD™ 99 ELECTRODE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation of aerosol. Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide sufficient air exchange and/or exhaust in work rooms.
Dispose of rinse water in accordance with local and national regulations.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and applied as directed.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3264
- Shipping Name
- CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (hydrochloric acid, Zinc chloride)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BrazeTec Soldaflux Z?
The signal word is danger.
What is the physical form of BrazeTec Soldaflux Z?
BrazeTec Soldaflux Z is a aqueous solution appearing as aqueous solution with colourless color.
What is BrazeTec Soldaflux Z used for?
soldering
What are the hazard statements for BrazeTec Soldaflux Z?
This substance has 5 hazard statements:
- H290: May be corrosive to metals.
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H335: May cause respiratory irritation.
- H410: Very toxic to aquatic life with long lasting effects.