Vinylcyclohexane

Remove from exposure, lie down. Remove to fresh air. If not breathing, give artificial respiration.

Symptoms: Difficulty in breathing. Inhalation of high vapor concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Take off contaminated clothing and shoes immediately.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.

Clean mouth with water.

Water spray. Carbon dioxide (CO₂). Dry chemical. Chemical foam. Water mist may be used to cool closed containers.

No information available

Flammable. Containers may explode when heated. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back.

Do not let this chemical enter the environment. See Section 12 for additional Ecological Information.

Soak up with inert absorbent material. Keep in suitable, closed containers for disposal. Use spark-proof tools and explosion-proof equipment.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Avoid contact with skin and eyes. Do not breathe mist/vapors/spray. Avoid contact with skin and clothing. Do not get in eyes, on skin, or on clothing. Do not ingest. If swallowed then seek immediate medical assistance. Handle product only in closed system or provide appropriate exhaust ventilation. Use spark-proof tools and explosion-proof equipment. Use only non-sparking tools. Keep away from open flames, hot surfaces and sources of ignition. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Take precautionary measures against static discharges.

Keep in a dry place. Keep container tightly closed. Keep away from heat, sparks and flame. Refrigerator/flammables. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed in a dry and well-ventilated place.

Avoid contact with skin and eyes. Do not ingest.

Keep away from open flames, hot surfaces and sources of ignition. Use spark-proof tools. Use only non-sparking tools. All metal parts of the equipment must be grounded. Take precautionary measures against static discharges.

Use explosion-proof electrical/ventilating/lighting equipment. Ensure adequate ventilation, especially in confined areas.

Wear appropriate protective gloves

Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.

No protective equipment is needed under normal use conditions.

Wear appropriate protective clothing to prevent skin exposure.

Stable under normal conditions.

None known, based on information available

None under normal processing. Hazardous polymerization does not occur.

Keep away from open flames, hot surfaces and sources of ignition. Incompatible products.

Strong oxidizing agents

Carbon monoxide (CO), Carbon dioxide (CO2)