Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- gleitmo 935
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Solid film lubricant
Manufacturers & Suppliers
FUCHS LUBRITECH GMBH
manufacturer
Werner-Heisenberg-Straße 1, D-67661 Kaiserslautern/Germany
+49 (0) 6301 3206 - 0
http://www.fuchs-lubritech.com
Emergency Contacts
Emergency Contact
+49 (0)171 / 4632154
Emergency Contact
06301/3206-808
This number is only available at office times.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of binder, solid lubricants and additives in water
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Nonylphenoxy(polyethoxy)ethanol | 68412-54-4 | 1 - 1% | Yes |
| N-methyl-2-pyrrolidone EC: 212-828-1 | 872-50-4 | 2.4 - 4.9% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure of fresh air. In the event of symptoms refer for medical treatment. (may be relevant for vapours of superheated product)
In case of contact with skin wash off immediately with plenty of water. Don't use organic solvents. Consult a doctor if skin irritation persists.
In case of contact with eyes rinse with plenty of water carefully. In the event of persistent symptoms seek medical treatment.
Do not induce vomiting. Refer to medical treatment.
Medical Treatment
Treat symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product does not burn, fire-extinguishing activities according to surrounding.
No special hazards arising from the use of the product. product itself does not burn.
Firefighter Protection
Use breathing apparatus with independent air supply.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
High risk of slipping due to leakage/spillage of product.
Do not discharge into the drains/surface waters/groundwater. Prevent spread over a wide area (e.g. by containment or oil barriers). Do not discharge into the subsoil/soil.
Take up with absorbent material (e.g. general-purpose binder).
Materials: absorbent material (e.g. general-purpose binder)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Take the usual precautions when handling with chemicals.
Keep container tightly closed, store at cool and aired place, open and handle carefully. Protect from frost. Store in a dry place. Recommended storage temperature: room temperature.
Do not store together with food.
Pay attention to general rules of internal fire prevention.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Closed holders to avoid evaporation loss
The choice of a suitable material for gloves depends not only on the material itself, but also on further quality characteristics. As the product is a preparation of several substances, the actual resistance of the materials used for gloves cannot be scientifically calculated; it is therefore mandatory to check this before using the product. Wear gloves of PVC at prolonged or intensive skin contact
tightly fitting goggles, in case of splashing
Not required at determined application
Usual working clothes for chemical industries
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No information available.
No information available.
No information available.
No hazardous reactions known.
No hazardous reactions known.
none at appropriate handling and storage
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for gleitmo 935?
The signal word is no signal word.
What is the physical form of gleitmo 935?
gleitmo 935 is a liquid with greyish-black color. It has almost odourless odor.
What is gleitmo 935 used for?
Solid film lubricant
What is the melting point of gleitmo 935?
The melting point is ca. 0 °C (concerning solvent) and the boiling point is ca. 100 °C (concerning solvent).