Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GLEITMO 805
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
No uses advised against identified.
Manufacturers & Suppliers
FUCHS LUBRITECH GmbH
manufacturer
Werner-Heisenberg-Straße 1, 67661 Kaiserslautern/Germany
+49 (0) 6301 3206-0
Fuchs Lubricants Co.
distributor
17050 Lathrop Avenue, Harvey, IL 60426
708-333-8900
Emergency Contacts
Emergency Contact
800-255-3924
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of the substances listed below with harmless additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| base oil ,VHVI | 72623-87-1 | 20 - 50% | Yes |
| Lime hydrate | 1305-62-0 | 10 - 25% | Yes |
| inorganic Zink salt | 7446-26-6 | 2.5 - 5% | Yes |
| Zn compound | 1314-13-2 | 0.1 - 0.25% | Yes |
Please note that the mineral oils and petroleum distillates used in our products are severely refined and have a DMSO extract < 3% as measured by method IP 346 and are not classified as carcinogenic according to Note L of Annex VI of Regulation EC 1272/2008.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms.
Wash with soap and water.
Get medical attention if any discomfort continues. Promptly wash eyes with plenty of water while lifting the eye lids.
Rinse mouth thoroughly.
Immediate Medical Attention
Get medical attention if symptoms occur.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, fire extinguishing powder or fog like water spraying. Extinguish larger fires with alcohol resistant foam or spray water with suitable surfactant added
Water with a full water jet.
During fire, gases hazardous to health may be formed.
Move container from fire area if it can be done without risk.
Firefighter Protection
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
In case of spills, beware of slippery floors and surfaces.
Avoid release to the environment. Prevent further leakage or spillage if safe to do so.
Scrape up spillage or absorb with absorbing material.
Materials: absorbing material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Observe good industrial hygiene practices. Do not eat, drink or smoke when working with the product. Take usual precautions when handling mineral oil products or chemical products.
Local regulations concerning handling and storage of waterpolluting products have to be followed.
Observe good industrial hygiene practices. Do not eat, drink or smoke when working with the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.
Avoid long-term and repeated skin contact. Protective gloves, where permitted in acc. to safety directions.
Safety glasses (EN 166) recommended during refilling.
Not relevant, due to the form of the product.
Do not carry cleaning cloths impregnated with the product in trouser pockets. Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal use conditions.
Stable under normal use conditions.
Stable under normal use conditions.
Stable under normal use conditions.
Strong oxidizing substances. Strong acids. Strong bases.
Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for GLEITMO 805?
The signal word is no signal word.
What is the physical form of GLEITMO 805?
GLEITMO 805 is a solid with light brown color. It has characteristic odor.
What is GLEITMO 805 used for?
Lubricant
What are the hazard statements for GLEITMO 805?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of GLEITMO 805?
The melting point is Not applicable for mixtures and the boiling point is Not applicable.