Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- high carbon steel blasting media
- Product Form
- mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
blasting operation
Manufacturers & Suppliers
Winoa Group
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Carbon EC: 231-153-3 | 7440-44-0 | 0.8 - 1.2% | No |
| Manganese EC: 231-105-1 | 7439-96-5 | 0.35 - 1.2% | No |
| Iron EC: 231-096-4 | 7439-89-6 | 95% | No |
| Silicon EC: 231-130-8 | 7440-21-3 | 0.4 - 1.2% | No |
The product is manufactured from melting of recovered scrap metal. Due to the scrap metal recovery process, other unintentionally added elements such as Chromium (Cr), Nickel (Ni) or copper (Cu), may be present as impurities. The concentrations of these elements could in some case individually exceed 0.1% but do not lead to a global classification of the alloy.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Symptoms: mechanical irritation of the respiratory tract
If on skin, wash thoroughly with water after handling. If irritation occurs: get medical advice/attention
Do not rub, wash thoroughly with water keeping eyelids wide open (at least 15 minutes). If irritation persists, consult an ophthalmologist.
Symptoms: mechanical irritation of the eyes
Get medical advice/attention.
Immediate Medical Attention
In all cases of doubt, or if symptoms persist, seek medical attention.
Medical Treatment
Symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Select media appropriate for the surrounding materials/area. In the event of Class A fires (packaging): ABC powder, water, foam. In the event of Class D fires (metal fire): powders, CO2
No further relevant information available
Dike and contain extinguishing fluids. Do not inhale the smoke
Firefighter Protection
Do not intervene without suitable protective equipment. Wear self-contained breathing apparatus and full body protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mark the application area and prohibit access to unauthorized persons. Avoid contact with skin, eyes or clothing. Do not breathe dust. Prevent or limit the formation and dispersion of dust.
Discharge into the environment must be avoided.
quickly clean the area with a vacuum cleaner or magnetic brush to reduce the risk of falling.
Related Products
Similar products with comparable safety profiles
Cast Steel Abrasive
---
Coal slag
CAS: 68131-74-8
Carbon Black, Granulated Activated ASTM SRB 8 D
CAS: 1333-86-4
Carbon black
CAS: 1333-86-4
Carbon, activated
CAS: 7440-44-0
FERROSAD cast steel shot to EN ISO 11124-4
---
Carbon Steel Wires & Aerospace Alloys
---
BARTON Garnet Abrasives
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle with care to avoid damage to packaging to avoid spillage. Use in well-ventilated area. Do not breath dust. Avoid contact with eye, skin, clothing.
Store in dry place.
Do not drink, eat or smoke at the workplace. Wash hands after handling. Separate work clothes from street clothes. Clean them separately.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. The user must know the exact nature of the dust produced during the industrial process for which the abrasive is used, and must take the necessary measures to protect his workers. A metrological study is necessary for blasted parts that may contain any substance with an exposure limit.
Protective gloves against mechanical risks according to EN 388
Tightly sealed goggles according to EN 166
Filter P2 according to EN 149
Wear suitable protective clothing according to EN ISO 14877
Take all necessary measures to avoid the accidental release of the product outside, in case of rupture of containers or transfer systems.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under normal conditions of storage and handling.
No hazardous reactions known.
Water. Humidity.
Acids.
No hazardous decomposition products under normal storage and uses conditions. Toxic metal oxide smoke can be released in case of fire.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for high carbon steel blasting media?
The signal word is no signal word.
What is the physical form of high carbon steel blasting media?
high carbon steel blasting media is a solid; massive metal alloy. with varied shades/hues of grey. color. It has odorless. odor.
What is high carbon steel blasting media used for?
blasting operation
What is the melting point of high carbon steel blasting media?
The melting point is 1400 - 1550 °C (2552 – 2822 °F) and the boiling point is 2850 – 3150 °C (5162 – 5702 °F).