Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 4-Vinyl-1-cyclohexene, stabilized
- Product Code
- AC140880000; AC140880050; AC140885000
- Synonyms
- Butadine dimer; Cyclohexene, 4-ethenyl-; Cyclohexenylethylene
Regulatory Identifiers
- CAS Number
- 100-40-3 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
Food, drug, pesticide or biocidal product use.
Manufacturers & Suppliers
Fisher Scientific Company
distributor
One Reagent Lane, Fair Lawn, NJ 07410
(201) 796-7100
Acros Organics
manufacturer
One Reagent Lane, Fair Lawn, NJ 07410
(201) 796-7100
Emergency Contacts
Emergency Contact
001-800-227-6701
Emergency Contact
+32 14 57 52 11
Emergency Contact
001-201-796-7100
Emergency Contact
+32 14 57 52 99
CHEMTREC
001-800-424-9300
CHEMTREC
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 4-Vinylcyclohexene | 100-40-3 | 99% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If breathing is difficult, give oxygen. Get medical attention.
Symptoms: Risk of serious damage to the lungs (by aspiration).
Get medical attention. Wash off immediately with plenty of water for at least 15 minutes.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Clean mouth with water and drink afterwards plenty of water. Do NOT induce vomiting. Call a physician or poison control center immediately. If vomiting occurs naturally, have victim lean forward.
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, carbon dioxide (CO2), dry chemical, alcohol-resistant foam. Water mist may be used to cool closed containers.
No information available
Flammable. Vapors may travel to source of ignition and flash back. Containers may explode when heated. Vapors may form explosive mixtures with air.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Should not be released into the environment. Avoid release to the environment.
Soak up with inert absorbent material
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
4-Vinyl-1-cyclohexene, stabilized
CAS: 100-40-3
4-Vinyl-1-cyclohexene, 98%
---
Vinyl acetate, stabilized
CAS: 108-05-4
Divinylbenzene (stabilised with 4-tert-butylpyrocatechol) for synthesis
CAS: 1321-74-0
Vinylcyclohexane
CAS: 695-12-5
Vinylcyclohexane
CAS: 695-12-5
1-Chloro-3-hydroxypropane, stabilized
CAS: 627-30-5
1,1,1-Trichloroethane, stabilized
CAS: 71-55-6
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment/face protection. Ensure adequate ventilation. Do not get in eyes, on skin, or on clothing. Avoid ingestion and inhalation. Keep away from open flames, hot surfaces and sources of ignition. Use only non-sparking tools. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Take precautionary measures against static discharges.
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat, sparks and flame. Refrigerator/flammables. Keep under nitrogen.
Do not get in eyes, on skin, or on clothing. Avoid ingestion and inhalation.
Keep away from open flames, hot surfaces and sources of ignition. Use only non-sparking tools. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
None under normal processing.
Excess heat. Incompatible products. Keep away from open flames, hot surfaces and sources of ignition.
Strong oxidizing agents, Alcohols, Amines
Carbon monoxide (CO), Carbon dioxide (CO₂)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1993
- Shipping Name
- Flammable liquid, n.o.s.
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is 4-Vinyl-1-cyclohexene, stabilized known by?
4-Vinyl-1-cyclohexene, stabilized is also known as: Butadine dimer; Cyclohexene, 4-ethenyl-; Cyclohexenylethylene
What is the hazard signal word for 4-Vinyl-1-cyclohexene, stabilized?
The signal word is danger.
What is the physical form of 4-Vinyl-1-cyclohexene, stabilized?
4-Vinyl-1-cyclohexene, stabilized is a liquid appearing as clear with clear color. It has odorless odor.
What is 4-Vinyl-1-cyclohexene, stabilized used for?
Laboratory chemicals.
What are the hazard statements for 4-Vinyl-1-cyclohexene, stabilized?
This substance has 6 hazard statements:
- H225: Highly flammable liquid and vapor
- H304: May be fatal if swallowed and enters airways
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H351: Suspected of causing cancer
- H361: Suspected of damaging fertility or the unborn child
What is the melting point of 4-Vinyl-1-cyclohexene, stabilized?
The melting point is -101 °C / -149.8 °F and the boiling point is 126 - 127 °C / 258.8 - 260.6 °F.