BRIGHT ZINC 400 ml AMBRO-SOL

Remove victim to fresh air, away from the accident scene. In the event of respiratory symptoms keep the victim in a comfortable position for breathing. If necessary administer oxygen. If the subject stops breathing, administer artificial respiration. Get medical advice/attention.

Symptoms: coughing, wheezing, breathing difficulty, asthma

Take off contaminated clothing. Wash immediately and thoroughly with running water (and soap if possible). Get medical advice. Avoid further contact with contaminated clothing.

Remove, if present, contact lenses if the situation allows you to do so easily. Wash immediately with plenty of water for at least 15 minutes, opening the eyelids fully. Get medical advice/attention.

Do not induce vomiting unless explicitly authorised by a doctor. Do not give anything by mouth to an unconscious person. Get medical advice/attention.

carbon dioxide, foam, powder and water spray. Dry sand; Special powder against metal combustion.

None in particular. water, foam ABC powder, carbon dioxide (CO2).

If overheated, aerosol cans can deform, explode and be propelled considerable distances.

Put a protective helmet on before approaching the fire.

Eliminate all sources of ignition (cigarettes, flames, sparks, etc.) from the leakage site. Send away individuals who are not suitably equipped.

Do not disperse in the environment.

soak up leaked product

Avoid bunching of electrostatic charges. Do not spray on flames or incandescent bodies. Vapours may catch fire and an explosion may occur; vapour accumulation is therefore to be avoided by leaving windows and doors open and ensuring good cross ventilation. Do not eat, drink or smoke during use. Do not breathe spray.

Store in a place where adequate ventilation is ensured, away from direct sunlight at a temperature below 50°C / 122°F, away from any combustion sources.

Do not eat, drink or smoke during use.

Avoid bunching of electrostatic charges. Do not spray on flames or incandescent bodies.

As the use of adequate technical equipment must always take priority over personal protective equipment, make sure that the workplace is well aired through effective local aspiration.

None required.

Wear airtight protective goggles (see standard EN ISO 16321).

Respiratory protection devices must be used if the technical measures adopted are not suitable for restricting the worker's exposure to the threshold values considered. Use a mask with a type AX filter combined with a type P filter should be worn (see standard EN 14387).

Wear category II professional long-sleeved overalls and safety footwear (see Regulation 2016/425 and standard EN ISO 20344/ISO 13034).

The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards. Product residues must not be indiscriminately disposed of with waste water or by dumping in waterways.

The product is stable in normal conditions of use and storage.

There are no particular risks of reaction with other substances in normal conditions of use.

Powdered aluminum: Develops hydrogen. Zinc powder: Risk of explosion on contact with various substances, may develop hydrogen. Xylene: May form explosive mixtures with air.

Avoid overheating. Avoid exposure to: heat, moisture.

Powdered aluminum: water, acids, alkalis, halogens, oxidising agents. Zinc powder: ammonium nitrate, ammonium sulphide, barium peroxide, lead nitride, chlorates, chromium trioxide, sodium hydroxide, oxidising agents, performic acid, acids, tetrachloromethane, water, alkaline hydroxides, bromine pentafluoride, calcium chloride, fluorine, hexachloroethane, nitrobenzene, potassium dioxide, carbon disulphide, silver, strong acids, strong alkalis. Xylene: strong oxidants, strong acids, nitric acid, perchlorates.

Information not available

HIN - Kemler: --

Limited Quantities: 1 L

Packaging instructions: 203