NextSDS Logo
Safety Data Sheet EN

LABEL REMOVER 200 ml

How compliant is your chemical safety?

Free 2-minute compliance assessment

Check Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LABEL REMOVER 200 ml
Product Form
Aerosols
Product Code
L10099000019

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Label remover. SU21 Consumer uses: Private households (= general public = consumers). SU22 Professional uses: publicly accessible (administration, education, entertainment, services, craftsmen). PC35 Washing and cleaning products (including solvent based products). PROC11 Non-industrial spraying. ERC8A Wide dispersive indoor use of processing aids in open systems. ERC8D Wide dispersive outdoor use of processing aids in open systems.

Uses advised against

No specific uses advised against are identified.

Manufacturers & Suppliers

DURABLE Hunke & Jochheim GmbH & Co. KG logo

DURABLE Hunke & Jochheim GmbH & Co. KG

distributor

Westfalenstrasse 77-79 D-58636 Iserlohn

http://www.durable.de

Emergency Contacts

DURABLE Hunke & Jochheim GmbH & Co. KG

+49 (0) 2371 / 662 - 0

only to the office hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosol Cat. 1 H229
Skin Sens. Cat. 1 H317
STOT SE Cat. 3 H336
Aquatic Chronic Cat. 2 H411
EUH 066

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H317 May cause an allergic skin reaction.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Pressurized container: Do not pierce or burn, even after use.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection
P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50 C/122F.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixture

>30%: alifatic hydrocarbons , perfume

Chemical Name CAS Number Concentration Hazardous
Hdrocarbons C7-C9 n-Alkan EC: 920-750-0 --- 50 - 100% Yes
Butane EC: 203-448-7 --- 10 - 25% Yes
Prn EC: 200-827-9 --- 10 - 25% Yes
Isobutane --- 1 - 25% Yes
(R)-p-Mentha-18-diene EC: 227-813-5 5989-27-5 1 - 25% Yes
Hdrocarbons --- 1 - 25% Yes

Notes

The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move the exposed person to fresh air at once. Call a POISON CENTER or doctor/physician if you feel unwell.

Skin contact

Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention if any discomfort continues.

Eye contact

Immediately flush with plenty of water or eyewash solution for up to 10 minutes.

Ingestion

Rinse mouth with water. Immediately give a couple of glasses of water or milk, provided the victim is fully conscious. Consult physician for specific advice.

Immediate Medical Attention

If unconscious: Call an ambulance/physician immediately. Show this Safe Data Sheet.

Related Substances

Similar chemicals with comparable safety profiles

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

All handling to take place in well-ventilated area.

Hands

Protective gloves are recommended. Nitrile gloves are recommended. Breakthrough time: >2 hours.

Eyes

Wear approved, tight fitting safety glasses where splashing is probable. Use approved safety goggles or face shield. (EN 166).

Respiratory

If ventilation is insufficient, use a respirator with type A (EN 141) gas filter and P2 particle filter (EN 143/EN 149).

Skin/Body

Wear appropriate clothing to prevent reasonably probable skin contact.

Environmental

See section 6.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flammability
---
Solubility
---
Cloud Point
---
Relative Evaporation Rate
---
Solidification Point
---
Crystallisation Point
---
Melting Point
Not relevant.
Boiling Point
65 C
Properties Status
---
Explosive Limits
---
Auto Ignition Temperature
---
Appearance
---
Solubility In Water
insoluble
Dynamic Viscosity
Not relevant.
Voc Content
---
Vapor Density
No data recorded.
Kinematic Viscosity
Not relevant.
Form
---
Colour Intensity
---
Odor Threshold
---
Softening Point
---
Bulk Density
Not relevant.
Flash Point
No data recorded.
Freezing Point
---
Odor
Lemon.
Metal Corrosion
---
Physical State
Aerosol.
Decomposition Temperature
No data recorded.
Evaporation Rate
No data recorded.
Lower Explosive Limit
No data recorded.
Density
---
Ph
No data recorded.
Solubility In Fat
---
State Under Standard Conditions
---
Physical State Data
aerosol
Molecular Weight
---
Partition Coefficient
No data recorded.
Relative Density
< 1 g/ml
Upper Explosive Limit
No data recorded.
Vapor Pressure
< 1,10 bar
Colour
Colourless.
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Transport Class
2.2
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LABEL REMOVER 200 ml?

The signal word is danger.

What is the physical form of LABEL REMOVER 200 ml?

LABEL REMOVER 200 ml is a aerosol. with colourless. color. It has lemon. odor.

What is LABEL REMOVER 200 ml used for?

Label remover. SU21 Consumer uses: Private households (= general public = consumers). SU22 Professional uses: publicly accessible (administration, education, entertainment, services, craftsmen). PC35 Washing and cleaning products (including solvent based products). PROC11 Non-industrial spraying. ERC8A Wide dispersive indoor use of processing aids in open systems. ERC8D Wide dispersive outdoor use of processing aids in open systems.

What are the hazard statements for LABEL REMOVER 200 ml?

This substance has 5 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H317: May cause an allergic skin reaction.
  • H336: May cause drowsiness or dizziness.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of LABEL REMOVER 200 ml?

The melting point is Not relevant. and the boiling point is 65 C.

Compliance Scan

Free compliance check