Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 1-Boc-3-hydroxyazetidine
- Product Code
- 694347
Regulatory Identifiers
- CAS Number
- 141699-55-0 Check regulations →
Identified Uses
Laboratory chemicals, Manufacture of substances
Manufacturers & Suppliers
Merck Life Science BV
manufacturer
Ildefonse Vandammestraat 5/7B, B-1560 HOEILAART
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-Boc-3-Hydroxyazetidine | 141699-55-0 | 90 - 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
For this substance/mixture no limitations of media extinguishing agents are given.
Vapours are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating.
Suppress (knock down) gases/vapours/mists with a water spray jet.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up dry. Dispose of properly. Clean up affected area.
Related Products
Similar products with comparable safety profiles
2-Methylaziridine
---
3-Hydroxy-1,2,3-benzotriazin-4(3H)-one
CAS: 28230-32-2
N-4-Boc-2-piperazinecarboxylic acid
CAS: 128019-59-0
3-Amino-5-cyclopropyl-1H-pyrazole
CAS: 175137-46-9
(R)-3-BOC-AMINOPIPERIDINE
CAS: 309956-78-3
1H-Benzotriazole
CAS: 95-14-7
3-Ethoxy-2-pyridinamine
CAS: 10006-74-3
2-(Bromomethyl)benzothiazole
CAS: 106086-78-6
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
Tightly closed. Dry.
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material: Nitrile rubber, Break through time: 480 min, Glove thickness: 0,4 mm, Protective index: Full contact, Manufacturer: Camatril® (KCL 730 / Aldrich Z677442, Size M). Material: Nitrile rubber, Break through time: 10 min, Glove thickness: 0,11 mm, Protective index: Splash contact, Manufacturer: Dermatril® (KCL 740 / Aldrich Z677272, Size M). Remarks: This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter : Filter type P2 type: The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature) .
Forms explosive mixtures with air on intense heating. A range from approx. 15 Kelvin below the flash point is to be rated as critical.
No data available
Strong heating.
Oxidizing agents
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 1-Boc-3-hydroxyazetidine?
The signal word is danger.
What is the physical form of 1-Boc-3-hydroxyazetidine?
1-Boc-3-hydroxyazetidine is a solid with no data available color. It has no data available odor.
What is 1-Boc-3-hydroxyazetidine used for?
Laboratory chemicals, Manufacture of substances
What are the hazard statements for 1-Boc-3-hydroxyazetidine?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H335: May cause respiratory irritation.
What is the melting point of 1-Boc-3-hydroxyazetidine?
The melting point is 36 - 43 °C and the boiling point is No data available.