Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- INDUSTRIAL CLEANER RAPID DRYING SPRAY
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Solvent cleaner.
Manufacturers & Suppliers
ROCOL
manufacturer
ROCOL House, Swillington, Leeds, West Yorkshire, LS26 8BS, ENGLAND
+44 (0) 113 232 2700
Emergency Contacts
Emergency Contact
+44 (0) 113 232 2600
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| PROPAN-2-OL EC: 200-661-7 | 67-63-0 | 30 - 50% | Yes |
| HYDROCARBONS C7-C9, ISOALKANES EC: 921-728-3 | 64741-66-8 | 30 - 50% | Yes |
| CARBON DIOXIDE AEROSOL PROPELLANT EC: 204-696-9 | 124-38-9 | 3 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty from exposure ensuring one's own safety whilst doing so. Consult a doctor.
Symptoms: There may be irritation of the throat with a feeling of tightness in the chest. Exposure may cause coughing or wheezing.
Remove all contaminated clothes and footwear immediately unless stuck to skin. Wash immediately with plenty of soap and water.
Symptoms: There may be irritation and redness at the site of contact.
Bathe the eye with running water for 15 minutes. Consult a doctor.
Symptoms: There may be irritation and redness. The eyes may water profusely.
Wash out mouth with water. Consult a doctor.
Symptoms: There may be soreness and redness of the mouth and throat.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Suitable extinguishing media for the surrounding fire should be used.
In combustion emits toxic fumes.
Use water spray to cool containers.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
If outside do not approach from downwind. If outside keep bystanders upwind and away from danger point. Mark out the contaminated area with signs and prevent access to unauthorised personnel. Turn leaking containers leak-side up to prevent the escape of liquid.
Do not discharge into drains or rivers. Contain the spillage using bunding.
Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
Materials: dry earth or sand
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid direct contact with the substance. Ensure there is sufficient ventilation of the area. Do not handle in a confined space. Avoid the formation or spread of mists in the air.
Store in a cool, well ventilated area. Keep container tightly closed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure there is sufficient ventilation of the area. The floor of the storage room must be impermeable to prevent the escape of liquids.
Protective gloves.
Safety glasses. Ensure eye bath is to hand.
Self-contained breathing apparatus must be available in case of emergency.
Protective clothing.
No data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under recommended transport or storage conditions.
Hazardous reactions will not occur under normal transport or storage conditions.
Heat.
Strong oxidising agents. Strong acids.
In combustion emits toxic fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS, FLAMMABLE
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for INDUSTRIAL CLEANER RAPID DRYING SPRAY?
The signal word is danger.
What is the physical form of INDUSTRIAL CLEANER RAPID DRYING SPRAY?
INDUSTRIAL CLEANER RAPID DRYING SPRAY is a aerosol with colourless color. It has characteristic odour odor.
What is INDUSTRIAL CLEANER RAPID DRYING SPRAY used for?
Solvent cleaner.
What are the hazard statements for INDUSTRIAL CLEANER RAPID DRYING SPRAY?
This substance has 6 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of INDUSTRIAL CLEANER RAPID DRYING SPRAY?
The melting point is <0 °C and the boiling point is >80 °C.