Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Solent Industrial Cleaner Rapid Dry
- Product Form
- Mixture
- Product Code
- SOL 732-0100K
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Fast drying cleaning and degreaser from metal components.
Uses advised against
Do not mix with other chemicals.
Manufacturers & Suppliers
Solent
Wigston, Leicester, England, LE18 2FS
+44 (0)116 288 8000
Action Can Ltd.
manufacturer
Dixon Close, Old Boston Trading Estate, Haydock, St. Helens, Merseyside, Wa11 9SF
01942 713667
Emergency Contacts
Emergency Contact
01942 713667
Mon – Fri: 9am to 5pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Product as supplied: Aerosol.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha (petroleum), hydrodesulfurized light EC: 295-434-2 | 92045-53-9 | 40 - 60% | Yes |
| Butane EC: 203-448-7 | 106-97-8 | 30 - 40% | Yes |
| Propan-2-ol EC: 200-661-7 | 67-63-0 | 2 - 5% | Yes |
For full text of R phrases see section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move person to fresh air. If symptoms persist, obtain medical attention.
After contact with skin, wash immediately with plenty of soap and water. If symptoms persist, obtain medical attention.
Hold eye open and rinse slowly and gently with water for 15-20 minutes. If symptoms persist, obtain medical attention.
Unlikely route of exposure.
Immediate Medical Attention
No special requirements.
Medical Treatment
Unlikely to be required but if necessary treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide.
None known.
Heating may cause pressure rise with risk of bursting. This product may give rise to hazardous fumes in a fire.
If it is safe to do so, containers should be removed from fire area because they are likely to rupture under fire conditions. Keep fire exposed containers cool by spraying with water.
Firefighter Protection
Fire fighters should wear complete protective clothing including self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leak if safe to do so.
Do not allow to enter drains, sewers or watercourses.
Adsorb spillages onto sand.
Related Products
Similar products with comparable safety profiles
INDUSTRIAL CLEANER RAPID DRYING SPRAY
---
Electronic Cleaning Solvent
---
Simple Green® Industrial Cleaner & Degreaser
---
Quick Clean™ Safety Solvent and Degreaser
---
Surface Cleaner Spray
---
Electronic Cleaning Solvent Plus
---
FW UV/Solvent Cleaner 11
---
RS Pro Ultrasonic Cleaning Liquid
UFI: 44R7-J06P-U004-KM5N
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not spray on a naked flame or any incandescent material. Do not pierce or burn, even after use.
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 °C.
Wash hands before breaks and after work.
Keep away from sources of ignition - No smoking. Keep away from: Electrostatic charge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation.
Wear: Impervious gloves. Breakthrough time of the glove material: refer to the information provided by the gloves’ producer.
Not normally required. Wear eye protection with side protection (EN166).
Not normally required. In case of insufficient ventilation, wear @ suitable respiratory equipment.
Do not allow to enter drains, sewers or watercourses.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
Reacts violently with - Strong oxidising agents.
Do not mix with other chemicals.
Oxidizing agent, Reducing agent.
This product may give rise to hazardous fumes in a fire.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Solent Industrial Cleaner Rapid Dry?
The signal word is na: r-phrases.
What is the physical form of Solent Industrial Cleaner Rapid Dry?
Solent Industrial Cleaner Rapid Dry is a aerosol appearing as aerosol. with colourless. color. It has characteristic. odor.
What is Solent Industrial Cleaner Rapid Dry used for?
Fast drying cleaning and degreaser from metal components.
What is the melting point of Solent Industrial Cleaner Rapid Dry?
The melting point is Not determined. and the boiling point is Not determined..