NextSDS Logo
Safety Data Sheet EN

Cleaning Fluid

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Cleaning Fluid
Product Code
9972100 / 9972101 / 9972103

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaning fluid for safety spectacles

Manufacturers & Suppliers

U

UVEX ARBEITSSCHUTZ GMBH

manufacturer

Würzburger Strasse 181 - 189, 90766 Fürth, Germany

+49 911 97360

Emergency Contacts

Emergency Contact

+49 911 97360

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
propan-2-ol EC: 200-661-7 67-63-0 5 - 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Provide fresh air. If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Mouth to mouth resuscitation should be avoided. Use alternative methods, preferably with oxygen or compressed air driven apparatus.

Skin contact

Wash with plenty of soap and water.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Ingestion

Rinse mouth. Do not induce vomiting. Get medical advice/attention if you feel unwell.

Immediate Medical Attention

In all cases of doubt, or when symptoms persist, seek medical advice. If breathing is irregular or stopped, immediately seek medical assistance. Get medical advice/attention if you feel unwell.

Medical Treatment

None.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

water spray, alcohol resistant foam, fire extinguishing powder, carbon dioxide (CO₂), co-ordinate firefighting measures to the fire surroundings

Unsuitable media

water jet

Specific hazards

Refer to Section 10

Instructions

Keep containers cool with water spray. Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.

Firefighter Protection

Wear self-contained breathing apparatus

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ventilate affected area.

Environmental

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Cleanup methods

Collect spillage.

Materials: Absorbent material (e.g. sand, diatomaceous earth, acid binder, universal binder, sawdust, etc.).

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes.

Storage

Keep container tightly closed and in a well-ventilated place. Keep cool. Protect against heat, frost.

Hygiene

Do not eat, drink and smoke in work areas. Wash hands after use.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use local and general ventilation.

Hands

short-term (single instance): not required fill and mix: wear suitable gloves Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.

Eyes

short-term (single instance): not required fill and mix: Wear eye glasses with side protection according to EN 166.

Respiratory

In case of inadequate ventilation wear respiratory protection. Type: A-P2 (combined filters against particles and organic gases and vapours, colour code: Brown/White). (EN 136, EN 140, EN 14387, EN 143, EN 149).

Skin/Body

fill and mix: Protective clothing against liquid chemicals. (EN 13832, EN 340, EN 14605).

Environmental

Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
colourless
Colour Intensity
---
Form
---
Odor
alcohol-like
Odor Threshold
---
Ph
7
Melting Point
not determined
Boiling Point
94 °C
Flash Point
39 °C (Abel-Pensky c.c.)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
not determined
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
0.98 g/cm³ at 20 °C
Flammability
non-combustible
Upper Explosive Limit
not determined
Lower Explosive Limit
not determined
Explosive Limits
---
Auto Ignition Temperature
not determined
Decomposition Temperature
not relevant
Solubility
---
Partition Coefficient
not determined
Solubility In Water
miscible in any proportion
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
not determined
Kinematic Viscosity
not determined
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

Reactivity

Needs not be classified as flammable: flash point of more than 35 °C and negative results have been obtained in the sustained combustibility test.

Hazardous reactions

In case of insufficient ventilation and/or in use, may form flammable/explosive vapour-air mixture.

Avoid

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Incompatible

oxidiser

Decomposition

Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Cleaning Fluid?

The signal word is no signal word.

What is the physical form of Cleaning Fluid?

Cleaning Fluid is a liquid with colourless color. It has alcohol-like odor.

What is Cleaning Fluid used for?

Cleaning fluid for safety spectacles

What is the melting point of Cleaning Fluid?

The melting point is not determined and the boiling point is 94 °C.