Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aerosol NC Industrielack uni glanz, diff colors
- Product Code
- REZ1062
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
painting
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Peter Kwasny GmbH
manufacturer
Heilbronner Str. 96 D-74831 Gundelsheim
0049-(0)6269-95-20
Emergency Contacts
Emergency Contact
+49 6269 95 20
National Poisons Information Service, Birmingham
844 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N/A | --- | 25 - 50% | Yes |
| N/A | --- | 10 - 25% | Yes |
| N/A | --- | 5 - 10% | Yes |
| N/A | --- | 5 - 10% | Yes |
| N/A | --- | 5 - 10% | Yes |
| N/A | --- | 5 - 10% | Yes |
| N/A | --- | 2.5 - 5% | Yes |
| N/A | --- | 2.5 - 5% | Yes |
| N/A | --- | 1 - 2.5% | Yes |
| N/A | --- | 1% | Yes |
| N/A | --- | 0.025 - 0.25% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Aerosol NC Industrielack uni glanz, diff colors
---
Aerosol NC Industrielack uni glanz, diff colors
---
Aerosol NC Industrielack uni mattiert, diff colors
---
Aerosol NC Decklack uni glanz, schwarz
---
Aerosol NC
---
AEROSOL 1K SB ACRYL TOPCOAT DOOSAN ORANGE
---
DUPLI-COLOR Color Spray Quality Paint (glossy)
---
HERKULA-UltraCoat Spezial farblos matt
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves Nitrile rubber, NBR. Gloves must be changed after every contamination. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. For the permanent contact of a maximum of 15 minutes gloves made of the following materials are suitable: butyl rubber, 0,7mm
Safety glasses. Tightly sealed goggles
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Half mask with combination filter, class A1P2 minimum, or breathing mask with outer air supply.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aerosol NC Industrielack uni glanz, diff colors?
The signal word is danger.
What is the physical form of Aerosol NC Industrielack uni glanz, diff colors?
Aerosol NC Industrielack uni glanz, diff colors is a aerosol with according to product specification color. It has characteristic odor.
What is Aerosol NC Industrielack uni glanz, diff colors used for?
painting
What are the hazard statements for Aerosol NC Industrielack uni glanz, diff colors?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of Aerosol NC Industrielack uni glanz, diff colors?
The melting point is Undetermined. and the boiling point is -44 C.