Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WS-Zink® 80/81
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
industrial paint Paint, Varnish.
Uses advised against
Do not use for products which come into contact with the food stuffs.
Manufacturers & Suppliers
W+S GmbH Lackchemie und Aerosol-Technik
manufacturer
Am Sportplatz 5, D-63791 Karlstein-Dettingen
+49 6188 9575-0
Emergency Contacts
GIZ-Nord Poisons Centre
+49 551-19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Paint, Varnish.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| zinc powder - zinc dust (stabilised) EC: 231-175-3 | 7440-66-6 | 50 - 75% | Yes |
| Lösungsmittelnaphta, leichte aromatische, Benzolgehalt <0,1% EC: 265-199-0 | 64742-95-6 | 10 - 20% | Yes |
| xylene EC: 215-535-7 | 1330-20-7 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of inhaling spray mists, consult a doctor immediately and show him box or label. If victim is at risk of losing consciousness, position and transport on their side. Provide fresh air.
Symptoms: Vapours may cause drowsiness and dizziness.
After contact with skin, wash immediately with: Water. Remove contaminated, saturated clothing immediately. Change contaminated clothing. Wash thoroughly the body (shower or bath).
Symptoms: Frequently or prolonged contact with skin may cause dermal irritation.
Rinse immediately carefully and thoroughly with eye-bath or water. If product gets into the eye, keep eyelid open and rinse immediately with large quantities of water, for at least 5 minutes. Subsequently consult an ophthalmologist.
If swallowed, immediately drink: Water. Do NOT induce vomiting. Call a physician immediately. Caution if victim vomits: Risk of aspiration!
Immediate Medical Attention
Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry extinguishing powder. Carbon dioxide (CO2). ABC powder.
High power water jet.
Burning produces heavy smoke. In case of fire and/or explosion do not breathe fumes.
Use water spray jet to protect personnel and to cool endangered containers.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Provide adequate ventilation. Remove all sources of ignition. Provide adequate ventilation. See protective measures under point 7 and 8.
Do not allow to enter into surface water or drains.
Absorb with liquid-binding material
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
If handled uncovered, arrangements with local exhaust ventilation have to be used. It is recommended to design all work processes always so that the following is excluded: inhalation. skin contact. Eye contact. Take precautionary measures against static discharges.
Keep container tightly closed. Keep only in the original container in a cool, well-ventilated place. Protect against: heat.
Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Refer to chapter 7. No further action is necessary.
Tested protective gloves are to be worn: Suitable material: NBR (Nitrile rubber)., Butyl rubber. Thickness of glove material: >0,4mm penetration time (maximum wearing period): >480min DIN-/EN-Norms: EN ISO 374
Suitable eye protection: Framed glasses. Goggles.
Respiratory protection necessary at: exceeding exposure limit values insufficient ventilation. insufficient absorption.
Suitable protective clothing: Lab apron.
Refer to chapter 7 No further action is necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No risks worthy of mention. Please observe the information on the safety data sheet at all times.
No risks worthy of mention.
No risks worthy of mention. Please observe the information on the safety data sheet at all times.
In case of warming: Danger of bursting container.
Alkalis (alkalis). Acid. Oxidizing agents.
Thermal decomposition can lead to the escape of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- PAINT or PAINT RELATED MATERIAL
- Transport Class
- 3
- Packing Group
- III
163, 223, 944, 955
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WS-Zink® 80/81?
The signal word is warning.
What is the physical form of WS-Zink® 80/81?
WS-Zink® 80/81 is a liquid with silver grey color. It has characteristic odor.
What is WS-Zink® 80/81 used for?
industrial paint Paint, Varnish.
What are the hazard statements for WS-Zink® 80/81?
This substance has 2 hazard statements:
- H226: Flammable liquid and vapour.
- H410: Very toxic to aquatic life with long lasting effects.