Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WS-Zink® Spray 80/81
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint, Varnish. industrial paint
Uses advised against
Do not use for products which come into contact with the food stuffs.
Manufacturers & Suppliers
W+S GmbH Lackchemie und Aerosol-Technik
manufacturer
Am Sportplatz 5, D-63791 Karlstein-Dettingen
+49 6188 9575-0
Emergency Contacts
GIZ-Nord Poisons Centre
+49 551-19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| zinc powder - zinc dust (stabilised) EC: 231-175-3 | 7440-66-6 | 30 - 35% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 15 - 20% | Yes |
| butane EC: 203-448-7 | 106-97-8 | 15 - 20% | Yes |
| ethyl acetate EC: 205-500-4 | 141-78-6 | 5 - 10% | Yes |
| 1-methoxy-2-propanol; monopropylene glycol methyl ether EC: 203-539-1 | 107-98-2 | 5 - 10% | Yes |
| xylene EC: 215-535-7 | 1330-20-7 | 5 - 10% | Yes |
| Lösungsmittelnaphta, leichte aromatische, Benzolgehalt <0,1% EC: 265-199-0 | 64742-95-6 | 1 - 5% | Yes |
| ethylbenzene EC: 202-849-4 | 100-41-4 | 1 - 5% | Yes |
| zinc oxide EC: 215-222-5 | 1314-13-2 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. Put victim at rest, cover with a blanket and keep warm. If victim is at risk of losing consciousness, position and transport on their side.
Symptoms: Vapours may cause drowsiness and dizziness.
Take off immediately all contaminated clothing, including underwear and shoes . Wash thoroughly the body (shower or bath). After contact with skin, wash immediately with plenty of water and soap.
Symptoms: Frequently or prolonged contact with skin may cause dermal irritation.
Rinse immediately carefully and thoroughly with eye-bath or water. If product gets into the eye, keep eyelid open and rinse immediately with large quantities of water, for at least 5 minutes. Subsequently consult an ophthalmologist.
Call a physician immediately. Do NOT induce vomiting. Give nothing to eat or drink.
Immediate Medical Attention
Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2). Foam. Extinguishing powder. Dry extinguishing powder.
High power water jet.
Heating causes rise in pressure with risk of bursting. Combustible. Vapours may form explosive mixtures with air. Special exposure hazards arising from the substance itself, combustion products, resulting gases: Nitrogen oxides (NOx). Carbon monoxide
Use water spray jet to protect personnel and to cool endangered containers.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove all sources of ignition. Provide adequate ventilation. Do not breathe gas/fumes/vapour/spray. Avoid contact with skin, eyes and clothes. Wear personal protection equipment.
Do not allow to enter into surface water or drains. Explosion hazard. Retain contaminated washing water and dispose it.
Absorb with liquid-binding material
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
If handled uncovered, arrangements with local exhaust ventilation have to be used. The following must be prevented: inhalation. skin contact. Eye contact.
Keep container tightly closed. Keep in a cool, well-ventilated place. Protect against: heat. Heating causes rise in pressure with risk of bursting.
Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Refer to chapter 7. No further action is necessary.
Tested protective gloves are to be worn: Suitable material: NBR (Nitrile rubber). , Butyl rubber. Thickness of glove material: >0,4mm penetration time (maximum wearing period): >480min DIN-/EN-Norms: EN ISO 374
Suitable eye protection: Goggles.
Filtering device (full mask or mouthpiece) with filter:
Additional body protection measures: Minimum standard for preventive measures while handling with working materials are specified in the TRGS 500. Do not eat, drink, smoke or sneeze at the workplace. Avoid contact with skin, eyes and clothes. Wash hands before breaks and after work. Set out skin protection guidelines.
Refer to chapter 7 No further action is necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No risks worthy of mention. Please observe the information on the safety data sheet at all times.
No risks worthy of mention. Please observe the information on the safety data sheet at all times.
No risks worthy of mention. Please observe the information on the safety data sheet at all times.
Keep away from heat. Ignition hazard. Danger of bursting container.
Alkalis (alkalis). Oxidizing agents.
Thermal decomposition can lead to the escape of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WS-Zink® Spray 80/81?
The signal word is danger.
What is the physical form of WS-Zink® Spray 80/81?
WS-Zink® Spray 80/81 is a aerosol with characteristic color. It has characteristic odor.
What is WS-Zink® Spray 80/81 used for?
Paint, Varnish. industrial paint
What are the hazard statements for WS-Zink® Spray 80/81?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H410: Very toxic to aquatic life with long lasting effects.