NextSDS Logo
Safety Data Sheet EN

OKS 240

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
OKS 240

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricants and lubricant additives

Uses advised against

Restricted to professional users.

Manufacturers & Suppliers

O

OKS Spezialschmierstoffe GmbH

manufacturer

Ganghoferstr. 47, 82216 Maisach-Gernlinden, Deutschland

+49 8142 3051 500

Emergency Contacts

Emergency Contact

+49 8142 3051 517

24/7 service

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2 H319
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H319 Causes serious eye irritation.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P264 Wash skin thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear eye protection/ face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/ attention.
P391 Collect spillage.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Synthetic hydrocarbon oil, Metal powder, solid lubricant

Chemical Name CAS Number Concentration Hazardous
copper EC: 231-159-6 7440-50-8 10 - 20% Yes
tin EC: 231-141-8 7440-31-5 1 - 10% No
molybdenum disulphide EC: 215-263-9 1317-33-5 1 - 10% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Take victim immediately to hospital. Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. If breathing is irregular or stopped, administer artificial respiration.

Symptoms: Headache, Nausea

Skin contact

Take off all contaminated clothing immediately. Wash off immediately with soap and plenty of water. Get medical attention immediately if irritation develops and persists. Wash clothing before reuse. Thoroughly clean shoes before reuse.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. Seek medical advice.

Symptoms: Causes serious eye irritation.

Ingestion

Move the victim to fresh air. If accidentally swallowed obtain immediate medical attention. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Take victim immediately to hospital. If accidentally swallowed obtain immediate medical attention. Get medical attention immediately if irritation develops and persists.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Unsuitable media

High volume water jet

Specific hazards

Carbon oxides, Nitrogen oxides (NOx), Sulphur oxides, Oxides of phosphorus, Metal oxides

Instructions

Standard procedure for chemical fires.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate personnel to safe areas. Ensure adequate ventilation. Do not breathe vapours, aerosols. Refer to protective measures listed in sections 7 and 8.

Environmental

Do not allow contact with soil, surface or ground water.

Cleanup methods

Pick up and transfer to properly labelled containers.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not use in areas without adequate ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product. Do not get in eyes or mouth or on skin. Do not get on skin or clothing. Do not ingest. Do not repack. These safety instructions also apply to empty packaging which may still contain product residues. Keep container closed when not in use.

Storage

Store in original container. Keep container closed when not in use. Keep in a dry, cool and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with the particular national regulations. Keep in properly labelled containers.

Hygiene

Wash face, hands and any exposed skin thoroughly after handling. Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Handle only in a place equipped with local exhaust (or other appropriate exhaust).

Hands

Material : butyl-rubber; Break through time : > 10 min; Protective index : Class 1; Remarks : For prolonged or repeated contact use protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case.

Eyes

Safety glasses

Respiratory

Not required; except in case of aerosol formation. Filter type : Filter type A-P

Skin/Body

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.

Environmental

Air : Should not be released into the environment. Soil : Do not allow contact with soil, surface or ground water. The product should not be allowed to enter drains, water courses or the soil. Water : Do not allow contact with soil, surface or ground water. The product should not be allowed to enter drains, water courses or the soil.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
solid
Colour
red brown
Colour Intensity
---
Form
---
Odor
characteristic
Odor Threshold
No data available
Ph
Not applicable
Melting Point
Not applicable
Boiling Point
No data available
Flash Point
Not applicable
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data available
Vapor Pressure
< 0.001 hPa (20 °C)
Vapor Density
---
Relative Density
1.30 (20 °C)
Bulk Density
No data available
Density
1.30 g/cm³ (20 °C)
Flammability
Combustible Solids
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
---
Partition Coefficient
No data available
Solubility In Water
insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
Not corrosive to metals
Dynamic Viscosity
No data available
Kinematic Viscosity
Not applicable
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No hazards to be specially mentioned.

Hazardous reactions

No dangerous reaction known under conditions of normal use.

Avoid

No conditions to be specially mentioned.

Incompatible

No materials to be especially mentioned.

Decomposition

No decomposition if stored and applied as directed.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Product: Toxicity to fish : Remarks: Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Toxicity to daphnia and other aquatic invertebrates : Remarks: No data available Toxicity to algae/aquatic plants : Remarks: No data available Toxicity to microorganisms : Remarks: No data available

Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

12.2 Persistence and degradability

Product: Biodegradability : Remarks: No data available Physico-chemical removability : Remarks: No data available

12.3 Bioaccumulative potential

Product: Bioaccumulation : Remarks: No data available

12.4 Mobility in soil

Product: Mobility : Remarks: No data available Distribution among environmental compartments : Remarks: No data available

12.5 Results of PBT and vPvB assessment

Assessment : This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

12.6 Other adverse effects

Endocrine disrupting potential : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.

The substance/mixture does not contain components considered to have endocrine disrupting properties at levels of 0.1% or higher.

12.6 Other adverse effects

Additional ecological information : Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Do not dispose of with domestic refuse. Dispose of as hazardous waste in compliance with local and national regulations.

Waste Codes

13 02 06* synthetic engine, gear and lubricating oils EWC
15 01 10* packaging containing residues of or contaminated by hazardous substances EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3077
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (copper)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Relevant EU provisions transposed through retained EU law

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for OKS 240?

The signal word is warning.

What is the physical form of OKS 240?

OKS 240 is a solid appearing as solid with red brown color. It has characteristic odor.

What is OKS 240 used for?

Lubricants and lubricant additives

What are the hazard statements for OKS 240?

This substance has 2 hazard statements:

  • H319: Causes serious eye irritation.
  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of OKS 240?

The melting point is Not applicable and the boiling point is No data available.