NextSDS Logo
Safety Data Sheet EN

Coolant BA15-eVo

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Coolant BA15-eVo

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Coolant

Uses advised against

No information available.

Manufacturers & Suppliers

E

EWS GmbH

manufacturer

Siemensstrasse 89A, D-47574 - Goch

+49 (0) 2823 879960

Emergency Contacts

GIZ-Nord

+49(0) 551 - 1 92 40

24h

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of water, propyleneglycol and inhibitors.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Provide fresh air.

Skin contact

Wash with plenty of water. Take off contaminated clothing and wash it before reuse.

Eye contact

Rinse immediately carefully and thoroughly with eye-bath or water.

Ingestion

Rinse mouth immediately and drink plenty of water.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Co-ordinate fire-fighting measures to the fire surroundings.

Specific hazards

Non-flammable.

Firefighter Protection

Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not allow to enter into surface water or drains.

Cleanup methods

Absorb with liquid-binding material

Materials: sand, diatomaceous earth, acid- or universal binding agents

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

No special measures are necessary.

Storage

Keep container tightly closed.

Fire prevention

No special fire protection measures are necessary.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If handled uncovered, arrangements with local exhaust ventilation have to be used.

Hands

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Breakthrough times and swelling properties of the material must be taken into consideration. Suitable material: NBR (Nitrile rubber). (DIN EN 374) Thickness of the glove material: >= 0,11 mm Breakthrough time (maximum wearing time): > 480 min

Eyes

goggles

Respiratory

In case of inadequate ventilation wear respiratory protection. Generation/formation of aerosols: Combination filtering device (EN 14387), Filtering device (full mask or mouthpiece) with filter: A2 P2;Colour:brown, white

Skin/Body

Wear suitable protective clothing.

Environmental

No information available.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
colourless
Colour Intensity
---
Form
---
Odor
characteristic
Odor Threshold
---
Ph
8,4 DIN 38404 C5
Melting Point
not determined DIN 53181
Boiling Point
not determined
Flash Point
-120 °C
Freezing Point
ca. -14 °C
Softening Point
---
Solidification Point
-16 °C
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
not determined
Vapor Pressure
---
Vapor Density
not determined
Relative Density
---
Bulk Density
---
Density
1,02 g/cm³
Flammability
---
Upper Explosive Limit
not determined
Lower Explosive Limit
not determined
Explosive Limits
---
Auto Ignition Temperature
No information available.
Decomposition Temperature
not determined
Solubility
---
Partition Coefficient
not determined
Solubility In Water
easily soluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under storage at normal ambient temperatures.

Reactivity

No hazardous reaction when handled and stored according to provisions.

Hazardous reactions

No known hazardous reactions.

Incompatible

No information available.

Decomposition

No known hazardous decomposition products.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Coolant BA15-eVo?

The signal word is no signal word.

What is the physical form of Coolant BA15-eVo?

Coolant BA15-eVo is a liquid with colourless color. It has characteristic odor.

What is Coolant BA15-eVo used for?

Coolant

What is the melting point of Coolant BA15-eVo?

The melting point is not determined DIN 53181 and the boiling point is not determined.