NextSDS Logo
Safety Data Sheet EN

Antifreeze/Coolant HT-FVA

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Antifreeze/Coolant HT-FVA
Product Form
Mixture
Product Code
Ford Internal Ref.: 505849

Regulatory Identifiers

CAS Number
N/A
UFI Code
DEX5-QFEF-A100-06EK

Identified Uses

Antifreeze

Uses advised against

None known

Manufacturers & Suppliers

F

Ford-Werke GmbH

manufacturer

Edsel-Ford-Str. 2-14, 50769 Cologne, Germany

+49 221 90-33333

F

Ford Motor Company Ltd.

distributor

Parts Distribution Centre, Royal Oak Way South, NN11 8NT Daventry, Northants, United Kingdom

+44 1327 305 198

Emergency Contacts

GBK GmbH

+49 (0) 6132-84463

24/7

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
STOT RE Cat. 2 H373

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H302 Harmful if swallowed.
H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements

P264 Wash hands thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P301 + P312 IF SWALLOWED: Call doctor, a POISON CENTER if you feel unwell.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Ethanediol EC: 203-473-3 107-21-1 90 - 100% Yes
Disodium sebacate EC: 241-300-3 17265-14-4 1 - 10% Yes
Methyl-1H-benzotriazole EC: 249-596-6 29385-43-1 0.1 - 0.25% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing. Get medical advice/attention.

Skin contact

Take off immediately all contaminated clothing and wash it before reuse. Wash immediately with plenty of water. Get medical advice/attention.

Eye contact

Rinse immediately and thoroughly, pulling the eyelids well away from the eye (15 minutes minimum). Remove contact lenses, if present and easy to do. Continue rinsing. Call a physician immediately.

Ingestion

Do not induce vomiting. Rinse mouth thoroughly. Get immediate medical advice/attention.

Symptoms: May cause damage to organs (kidneys) (oral). Harmful if swallowed.

Immediate Medical Attention

Get medical advice/attention for inhalation and skin contact. Call a physician immediately for eye contact. Get immediate medical advice/attention for ingestion.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

Hands

Protective gloves. EN 374. The recommendation is only valid for the supplied product and the stated application. Special working conditions, like heat or mechanical strain, which deviate from the test conditions, can reduce the protective effect provided by the recommended glove. Material: Nitrile rubber (NBR), Permeation: 6 (> 480 minutes), Thickness (mm): 0,4. Comments: Glove recommendation: Camatril Velours 730 (Kchele-Cama GmbH, source of supply see www.kcl.de) or comparable product. In case of splash contact: Nitrile rubber (NBR), Permeation: 6 (> 480 minutes), Thickness (mm): 0,4. Comments: Glove recommendation: Camatril Velours 730 (Kchele-Cama GmbH, source of supply see www.kcl.de) or comparable product.

Eyes

Safety glasses with side shields. EN 166.

Respiratory

If engineering controls do not maintain airborne concentrations below recommended exposure limits (where applicable) or to an acceptable level (in countries where exposure limits have not been established), an approved respirator must be worn. Extra personal protection: A/P2 filter respirator for organic vapour and harmful dust.

Skin/Body

Wear suitable protective clothing. Long sleeved protective clothing. EN 14605. EN ISO 13982. Materials for protective clothing: Personal protective equipment should be chosen according to the CEN standards and in discussion with the supplier of the protective equipment.

Environmental

Avoid release to the environment. Inform appropriate managerial or supervisory personnel of all environmental releases.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Auto Ignition Temperature
Not available
Freezing Point
Not available
Solubility In Water
Miscible (in all proportions) with : water.
Molecular Weight
---
Physical State Data
liquid
Relative Evaporation Rate
---
Boiling Point
> 170
Bulk Density
---
Metal Corrosion
---
Crystallisation Point
---
Vapor Density
---
Solidification Point
---
State Under Standard Conditions
---
Upper Explosive Limit
Not available
Density
1.125 g/cm3 @ 20
Form
---
Lower Explosive Limit
Not available
Softening Point
---
Explosive Limits
---
Physical State
Liquid
Odor Threshold
Not available
Melting Point
Not available
Colour Intensity
---
Odor
Characteristic.
Solubility In Fat
---
Solubility
Miscible (in all proportions) with : water.
Kinematic Viscosity
20-30 mm2/s @ 20
Flash Point
> 110
Cloud Point
---
Dynamic Viscosity
---
Decomposition Temperature
Not available
Partition Coefficient
Not available
Properties Status
---
Vapor Pressure
0.2 hPa @ 20
Colour
Purple.
Evaporation Rate
---
Ph
8.4 100%
Relative Density
Not available
Voc Content
92 %
Appearance
---
Flammability
Not available
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Antifreeze/Coolant HT-FVA?

The signal word is warning.

What is the physical form of Antifreeze/Coolant HT-FVA?

Antifreeze/Coolant HT-FVA is a liquid with purple. color. It has characteristic. odor.

What is the solubility of Antifreeze/Coolant HT-FVA?

Miscible (in all proportions) with : water.

What is Antifreeze/Coolant HT-FVA used for?

Antifreeze

What are the hazard statements for Antifreeze/Coolant HT-FVA?

This substance has 2 hazard statements:

  • H302: Harmful if swallowed.
  • H373: May cause damage to organs through prolonged or repeated exposure.

What is the melting point of Antifreeze/Coolant HT-FVA?

The melting point is Not available and the boiling point is > 170.