NextSDS Logo
Safety Data Sheet EN

1,2,4,5-Tetrachloro-3-nitrobenzene

CAS 117-18-0

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
1,2,4,5-Tetrachloro-3-nitrobenzene
Product Code
40384
Chemical Name
1,2,4,5-Tetrachloro-3-nitrobenzene

Regulatory Identifiers

CAS Number
117-18-0 Check regulations →

Identified Uses

Laboratory chemicals, Manufacture of substances

Manufacturers & Suppliers

M

Merck Life Science BV

manufacturer

Ildefonse Vandammestraat 5/7B, B-1560 HOEILAART

+32 (0)3 899-1301

Emergency Contacts

CHEMTREC

+(32) 28 083237

Anti-poison centre

070 245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Skin Sens. Cat. 1 H317
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H302 Harmful if swallowed.
H317 May cause an allergic skin reaction.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P261 Avoid breathing dust.
P264 Wash skin thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves.
P301 + P312 IF SWALLOWED: Call a POISON CENTER/ doctor if you feel unwell.
P302 + P352 IF ON SKIN: Wash with plenty of water.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Tecnazene EC: 204-178-2 117-18-0 90 - 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

After inhalation: fresh air.

Skin contact

Take off immediately all contaminated clothing. Rinse skin with water/ shower.

Eye contact

After eye contact: rinse out with plenty of water. Remove contact lenses.

Ingestion

After swallowing: immediately make victim drink water (two glasses at most).

Immediate Medical Attention

Consult a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water, Foam, Carbon dioxide (CO2), Dry powder

Unsuitable media

For this substance/mixture no limitations of extinguishing agents are given.

Specific hazards

Combustible. Development of hazardous combustion gases or vapours possible in the event of fire.

Instructions

Suppress (knock down) gases/vapours/mists with a water spray jet.

Firefighter Protection

Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate the danger area, observe emergency procedures, consult an expert.

Environmental

Do not let product enter drains.

Cleanup methods

Take up dry. Clean up affected area.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. For precautions see section 2.2.

Storage

Tightly closed. Dry.

Hygiene

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Eyes

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses

Respiratory

required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Skin/Body

protective clothing

Environmental

Do not let product enter drains.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Freezing Point
---
Odor Threshold
---
Auto Ignition Temperature
No data available
Dynamic Viscosity
No data available
Solubility
---
Properties Status
---
Boiling Point
304 °C (1.013 hPa)
Metal Corrosion
---
Crystallisation Point
---
Molecular Weight
260,89 g/mol
State Under Standard Conditions
---
Voc Content
---
Physical State Data
solid
Density
No data available
Physical State
solid
Evaporation Rate
No data available
Solubility In Water
No data available
Kinematic Viscosity
No data available
Vapor Pressure
No data available
Solidification Point
---
Bulk Density
---
Softening Point
---
Lower Explosive Limit
No data available
Upper Explosive Limit
No data available
Explosive Limits
---
Ph
No data available
Vapor Density
---
Partition Coefficient
No data available
Odor
No data available
Flammability
No data available
Form
powder
Appearance
---
Melting Point
98 - 101 °C
Relative Evaporation Rate
---
Flash Point
No data available
Colour
white
Relative Density
No data available
Cloud Point
---
Solubility In Fat
---
Decomposition Temperature
No data available
Colour Intensity
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable under standard ambient conditions (room temperature).

Reactivity

The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.

Hazardous reactions

Violent reactions possible with: Strong oxidizing agents

Avoid

no information available

Incompatible

Strong oxidizing agents Strong bases

Decomposition

In the event of fire: see section 5

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3077
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Tecnazene)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 1,2,4,5-Tetrachloro-3-nitrobenzene?

The signal word is warning.

What is the physical form of 1,2,4,5-Tetrachloro-3-nitrobenzene?

1,2,4,5-Tetrachloro-3-nitrobenzene is a solid with white color. It has no data available odor.

What is 1,2,4,5-Tetrachloro-3-nitrobenzene used for?

Laboratory chemicals, Manufacture of substances

What are the hazard statements for 1,2,4,5-Tetrachloro-3-nitrobenzene?

This substance has 3 hazard statements:

  • H302: Harmful if swallowed.
  • H317: May cause an allergic skin reaction.
  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of 1,2,4,5-Tetrachloro-3-nitrobenzene?

The melting point is 98 - 101 °C and the boiling point is 304 °C (1.013 hPa).