NextSDS Logo
Safety Data Sheet EN

Hydrochloric acid 36% p.

CAS 7647-01-0

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Hydrochloric acid 36% p.
Product Code
CL00.0305
Chemical Name
Hydrochloric acid

Regulatory Identifiers

CAS Number
7647-01-0 Check regulations →
REACH No.
01-2119484862-27

Identified Uses

Reagent for analysis

Manufacturers & Suppliers

A

AnalytiChem Belgium NV

manufacturer

Industriezone "De Arend" 2, B-8210 Zedelgem, BELGIUM

+32 50 28 83 20

Emergency Contacts

Emergency Contact

00 (32) 50.28.83.20

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Skin Corr. Cat. 1B H314
STOT SE Cat. 3 H335

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.
H335 May cause respiratory irritation.

Precautionary Statements

P280 Wear protective gloves, protective clothing, eye protection, face protection.
P301 + P330 + P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P311 IF exposed or concerned: Call a POISON CENTER or doctor/physician.
IF exposed or if you feel unwell: Immediately call a POISON CENTER or doctor/physician.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Hydrochloric acid 36% p. EC: 231-595-7 7647-01-0 36% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air, seek medical advice.

Skin contact

Wash off with plenty of water. Dab with polyethylene glycol 400. Remove contaminated clothing. Immediately call in physician.

Eye contact

Rinse out with plenty of water for at least 10 minutes with the eyelid held wide open. Immediately call an ophthalmologist.

Ingestion

Never give anything by mouth to an unconscious person. Make victim drink water (two glasses at most), avoid vomiting (risk of perforation!). Immediately call in physician. Do not attempt to neutralize.

Immediate Medical Attention

Immediately call in physician. Immediately call an ophthalmologist.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

In adaption to materials stored in the immediate neighbourhood.

Unsuitable media

Contain escaping vapours with water. Prevent fire-fighting water from entering surface water or groundwater.

Specific hazards

Non-combustible. Ambient fire may liberate hazardous vapours.

Instructions

Do not stay in dangerous zone without self-contained breathing apparatus. In order to avoid contact with skin, keep a safety distance and wear suitable protective clothing.

Firefighter Protection

Do not stay in dangerous zone without self-contained breathing apparatus. In order to avoid contact with skin, keep a safety distance and wear suitable protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not inhale vapours/aerosols. Avoid substance contact. Ensure supply of fresh air in enclosed rooms.

Environmental

Do not allow to enter sewerage system.

Cleanup methods

Absorb on vermiculite, sand or a pillow from Chemical Spill Center.

Materials: vermiculite, sand or a pillow from Chemical Spill Center

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

No special measures necessary. The product should be handled with the care usual when dealing with chemicals. For precautions see section 2.2

Storage

Corrosives-area. Keep container tightly closed. Recommended storage temperature see product label.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Protective clothing should be selected specifically for the working place, depending on concentration and quantity of the hazardous substances handled. The resistance of the protective clothing to chemicals should be ascertained with the respective supplier. See section 7.1

Hands

Required.

Eyes

Required.

Respiratory

Wear gas mask. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Skin/Body

Required.

Environmental

Do not allow to enter sewerage system.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colourless
Colour Intensity
---
Form
Liquid
Odor
specific
Odor Threshold
---
Ph
pH < 1
Melting Point
-25°C
Boiling Point
50 °C
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
1,19 g/ml
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
soluble
Solubility In Fat
---
Molecular Weight
36.46 g/mol
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No further relevant information available.

Reactivity

See section 10.3

Avoid

heat and sun light

Incompatible

acids, metals, combustible materials

Decomposition

No further relevant information available.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1789
Shipping Name
Hydrochloric acid
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Hydrochloric acid 36% p.?

The signal word is danger.

What is the physical form of Hydrochloric acid 36% p.?

Hydrochloric acid 36% p. is a liquid with colourless color. It has specific odor.

What is Hydrochloric acid 36% p. used for?

Reagent for analysis

What are the hazard statements for Hydrochloric acid 36% p.?

This substance has 3 hazard statements:

  • H290: May be corrosive to metals.
  • H314: Causes severe skin burns and eye damage.
  • H335: May cause respiratory irritation.

What is the melting point of Hydrochloric acid 36% p.?

The melting point is -25°C and the boiling point is 50 °C.