Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Nitric acid, Trace Metal Grade
- Product Code
- A509-212; A509-500; A509-P212; A509-P500; A509-SK212
- Chemical Name
- Nitric acid
- Synonyms
- Azotic acid; Engraver's acid; Aqua fortis
Regulatory Identifiers
- CAS Number
- 7697-37-2 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
Food, drug, pesticide or biocidal product use.
Manufacturers & Suppliers
Fisher Scientific Company
manufacturer
One Reagent Lane Fair Lawn, NJ 07410
(201) 796-7100
Emergency Contacts
CHEMTREC
800-424-9300
CHEMTREC
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS05
GHS06
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, give oxygen. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Remove from exposure, lie down. Call a physician immediately.
Wash off immediately with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Call a physician immediately.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical attention is required.
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Clean mouth with water. Call a physician immediately.
Symptoms: Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation.
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Treat symptomatically. Possible perforation of stomach or esophagus should be investigated.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, dry chemical, dry sand, alcohol-resistant foam.
No information available
Thermal decomposition can lead to release of irritating gases and vapors. The product causes burns of eyes, skin and mucous membranes. Oxidizer: Contact with combustible/organic material may cause fire. May ignite combustibles (wood paper, oil, clothing, etc.).
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Thermal decomposition can lead to release of irritating gases and vapors.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak. Ensure adequate ventilation.
Should not be released into the environment.
Soak up with inert absorbent material. Sweep up and shovel into suitable containers for disposal.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only under a chemical fume hood. Wear personal protective equipment/face protection. Do not get in eyes, on skin, or on clothing. Do not ingest. If swallowed then seek immediate medical assistance. Do not breathe mist/vapors/spray. Keep away from clothing and other combustible materials.
Keep containers tightly closed in a dry, cool and well-ventilated place. Do not store near combustible materials.
Keep away from clothing and other combustible materials.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Oxidizer: Contact with combustible/organic material may cause fire.
Yes
None under normal processing. Hazardous polymerization does not occur.
Incompatible products. Combustible material. Excess heat. Exposure to air or moisture over prolonged periods.
Combustible material, Strong bases, Reducing Agent, Metals, Finely powdered metals, Organic materials, Aldehydes, Alcohols, Cyanides, Ammonia, Strong reducing agents
Nitrogen oxides (NOx), Thermal decomposition can lead to release of irritating gases and vapors
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2031
- Shipping Name
- NITRIC ACID
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Nitric acid, Trace Metal Grade known by?
Nitric acid, Trace Metal Grade is also known as: Azotic acid; Engraver's acid; Aqua fortis
What is the hazard signal word for Nitric acid, Trace Metal Grade?
The signal word is danger.
What is the physical form of Nitric acid, Trace Metal Grade?
Nitric acid, Trace Metal Grade is a liquid appearing as clear colorless, light yellow with clear colorless, light yellow color. It has strong acrid odor.
What is Nitric acid, Trace Metal Grade used for?
Laboratory chemicals.
What are the hazard statements for Nitric acid, Trace Metal Grade?
This substance has 4 hazard statements:
- H272: May intensify fire; oxidizer
- H290: May be corrosive to metals
- H314: Causes severe skin burns and eye damage
- H331: Toxic if inhaled
What is the melting point of Nitric acid, Trace Metal Grade?
The melting point is -41 °C / -41.8 °F and the boiling point is Not applicable.