Nitric acid 69% for analysis EMSURE® ACS,Reag. Ph Eur

After inhalation: fresh air. Call in physician. If breathing stops: immediately apply artificial respiration, if necessary also oxygen.

In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.

After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.

After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

For this substance/mixture no limitations of extinguishing agents are given.

Not combustible. Has a fire-promoting effect due to release of oxygen. Ambient fire may liberate hazardous vapours.

Suppress (knock down) gases/vapours/mists with a water spray jet. Cool closed containers exposed to fire with water spray.

Avoid substance contact. Do not breathe vapours, aerosols. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not empty into drains.

Take up with liquid-absorbent and neutralising material (e.g. Chemizorb® H ⁺ , Merck Art. No. 101595). Dispose of properly. Clean up affected area.

Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® H ⁺ , Merck Art. No. 101595)

Observe label precautions. Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols.

Keep locked up or in an area accessible only to qualified or authorised persons. Recommended storage temperature see product label.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Full contact Material: Viton® Minimum layer thickness: 0.7 mm Break through time: > 480 min Material tested:Vitoject® (KCL 890 / Aldrich Z677698, Size M). Splash contact Material: Latex gloves Minimum layer thickness: 0.6 mm Break through time: > 120 min Material tested:Lapren® (KCL 706 / Aldrich Z677558, Size M). This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Tightly fitting safety goggles

Recommended Filter type: Filter E-(P3). The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

acid-resistant protective clothing

Do not empty into drains.

No data available

strong oxidising agent

Risk of explosion, ignition, or formation of inflammable gases or vapours, and violent reactions with the listed substances.

no information available

Acetone, acetonitrile, acetylidene, Alcohols, arsenic hydride, Organic Substances, Benzene, phosphides, anilines, Amines, Halogenated hydrocarbon, Diethylether, dimethyl ether, hydrazines, Nitro compounds, Sulphides, Dioxane, acetic acid, Acetic anhydride, ethanol, Ethylene glycol, Fluorine, Hydrazine hydrate, lithium silicide, organic solvents, Manganese, Cyanides, Powdered metals, Methanol, petrol, phosphorus, hydrogen, anhydrides, Reducing agents, sulphur dioxide, thiocyanates, Titanium, Impurities, hydrogen peroxide, Tin, sugars, xylene, carbon/soot, oils, dichloromethane, rubber, formaldehyde, potassium chlorate, mercury(II) nitrate, Nitrobenzene, sulfuric acid, potassium permanganate, glycerol, Ammonia, combustible substances, Aldehydes, furfuryl alcohol, hydrogen iodide, Potassium, Lithium, Magnesium, sodium hydrides, pyridine, hydrogen sulphide, Nitriles, antimony, arsenic, Boron, ferric oxide, alkalines, sodium hypochlorite, formic acid, halogen-halogen compounds, Germanium, nitrides, Sodium hydroxide solution, Sodium hydroxide, selenium, Bismuth, chlorates.

See section 5