Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PROLAN PROTECTIVE LANOLIN – GREASE
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant. Corrosion inhibitor.
Manufacturers & Suppliers
Denrex ApS
manufacturer
Daniavej 60 C, Assens DK- 9550 Mariager
+45 24428188
http://www.denrex.com
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product contains: Lanolin and vegetable oil.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Lanolin | --- | --- | No |
| vegetable oil | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move into fresh air and keep at rest.
Remove contaminated clothing. Always remove grease with soap and water or skin cleaning agent.
Symptoms: Rashes, wounds or other skin disorders
Immediately flush with plenty of water for at least 15 minutes. Remove any contact lenses and open eyelids widely.
Symptoms: Irritation
Immediately rinse mouth and drink 1-2 glasses of water or milk. Keep person under observation. If vomiting occurs, keep head low.
Immediate Medical Attention
In case of rashes, wounds or other skin disorders: Seek medical attention and bring along these instructions. If irritation persists: Seek medical attention and bring along these instructions. Immediate transport to hospital. Bring along these instructions.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol-resistant foam, carbon dioxide, dry powder or water fog.
During fire, gases hazardous to health may be formed.
Firefighter Protection
Selection of respiratory protection for fire fighting: follow the general fire precautions indicated in the workplace.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Follow precautions for safe handling described in this safety data sheet.
Avoid discharge into water courses or onto the ground.
Absorb spillage with oil-absorbing material. Clean contaminated area with oil-removing material.
Materials: oil-absorbing material, oil-removing material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe good chemical hygiene practices. Avoid prolonged and repeated contact with grease, particularly used grease. Always remove grease with soap and water or skin cleaning agent, never use organic solvents.
Store in tightly closed original container in a dry, cool and well-ventilated place.
Observe good chemical hygiene practices. Always remove grease with soap and water or skin cleaning agent, never use organic solvents.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. When working with heated grease, mechanical ventilation may be required.
Risk of contact: Wear protective gloves. Nitrile gloves are recommended. Thickness: > 0,3 mm; Breakthrough time: > 240 min. The most suitable glove must be chosen in collaboration with the supplier of gloves, who can inform about the breakthrough time of the glove material.
Risk of contact: Wear goggles/face shield.
In case of inadequate ventilation use suitable respirator. Use respiratory equipment with particle filter, type P2.
Not available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions.
None known.
None known.
None specific.
Strong oxidizing substances.
None in particular.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PROLAN PROTECTIVE LANOLIN – GREASE?
The signal word is no signal word.
What is the physical form of PROLAN PROTECTIVE LANOLIN – GREASE?
PROLAN PROTECTIVE LANOLIN – GREASE is a liquid with light brown. color. It has characteristic. odor.
What is the solubility of PROLAN PROTECTIVE LANOLIN – GREASE?
Insoluble in water.
What is PROLAN PROTECTIVE LANOLIN – GREASE used for?
Lubricant. Corrosion inhibitor.
What is the melting point of PROLAN PROTECTIVE LANOLIN – GREASE?
The melting point is not available and the boiling point is Not available..