Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PROTECTIVE LANOLIN PROLAN
- Product Form
- AEROSOL CAN
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant. Anti-rust agent.
Manufacturers & Suppliers
Denrex ApS
distributor
Daniavej 60 C, Assens, DK- 9550 Mariager
+45 24428188
http://www.denrex.com
Emergency Contacts
National Poison Center
030-2748888
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product contains: lanolin, organic solvent and propeller.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (Ardoli), light fraction treated with hydrogen EC: 265-149-8 | 64742-47-8 | 30 - 60% | Yes |
| Dimetoxymeter EC: 203-714-2 | 109-87-5 | 10 - 30% | Yes |
| Carbon dioxide EC: 204-696-9 | 124-38-9 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Take the casualty to fresh air and calm down under supervision. If the victim is not well, go to the hospital and take this information card with you.
Remove contaminated clothing immediately and wash the skin with soap and water. If you suffer from eczema or other skin problems: see a doctor and take the information card with you.
Rinse immediately and thoroughly with water for at least 15 minutes. Remove all contact lenses and close your wide-open eye. If irritation persists: Consult your doctor and keep the information card with you.
Rinse your mouth immediately and drink 1-2 glasses of water. Keep an eye on the person. If you don't feel well: transport to the hospital. Take this guide with you.
Immediate Medical Attention
If the victim is not well, go to the hospital and take this information card with you.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide or powder
When heated strongly, overpressure is created, which can lead to the explosion of the aerosol can.
Allow containers exposed to heat to cool with water and remove them from the source of fire if safe.
Firefighter Protection
Choosing how to protect the air you breathe in the event of a fire: Follow the company's general rules of conduct.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Please observe the precautions listed in this leaflet.
Avoid runoff into soil and waterways. Aerosols should not be disposed of in the environment.
Absorb waste with non-flammable absorbent material.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of spray mist and contact with skin and eyes. Observe the correct physical and hygienic regulations.
Store in the original sealed container in a well-ventilated place. Do not store near heat sources or expose to high temperatures.
Observe the correct physical and hygienic regulations.
Smoking and the use of open flames and other sources of ignition are prohibited.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. Observe the limit values and minimise the risk of smoke and splashing water.
If there is a risk of contact: use protective gloves. Nitrile gloves are recommended, but liquid can get inside. Therefore, the gloves should be replaced repeatedly. Thickness: >0.3mm; Protection time: >240 min. Choose the most suitable glove in consultation with the appropriate supplier, who can provide you with information on the breakthrough time of the glove material.
In case of splash hazard: Use safety glasses/face protection.
Use a respirator with a combination filter, type A2/P3.
If there is a risk of contact, wear an apron or special work clothes.
Unknown.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions.
Unknown.
Unknown.
Avoid high temperatures and direct sunlight.
Under normal circumstances, none.
Not special.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- Aérosol, Brainbar
- Transport Class
- 2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PROTECTIVE LANOLIN PROLAN?
The signal word is danger.
What is the physical form of PROTECTIVE LANOLIN PROLAN?
PROTECTIVE LANOLIN PROLAN is a aerosol with colorless. color. It has solvent properties odor.
What is the solubility of PROTECTIVE LANOLIN PROLAN?
Insoluble in water.
What is PROTECTIVE LANOLIN PROLAN used for?
Lubricant. Anti-rust agent.
What are the hazard statements for PROTECTIVE LANOLIN PROLAN?
This substance has 5 hazard statements:
- H222: Highly flammable aerosol.
- H229: Pressure vessel: May burst when heated.
- H315: Irritating to the skin.
- H336: May cause drowsiness or dizziness.
- H411: It is toxic to aquatic life with long-lasting effects.