Hydraulic 46

remove to fresh air.

Symptoms: irritation to the nose or throat, or coughing

Wash skin thoroughly with soap and water as soon as reasonably practicable. Remove heavily contaminated clothing and wash underlying skin.

Wash eye thoroughly with copious quantities of water, ensuring eyelids are held open.

Symptoms: pain or redness

wash out thoroughly with water. Do not induce vomiting.

Symptoms: contamination of the mouth

Foam, carbon dioxide or dry chemical. Water can be used to cool and protect exposed material.

Toxic fumes, gases or vapours may be evolved on burning. Vapours may be heavier than air and the substance or mixture may travel along the ground to a distant ignition source and flash back.

Water may cause splattering.

Immediately evacuate all personnel from danger area. Wear Personal Protective Equipment. Eliminate all sources of heat, sparks, pilot lights, static electricity and open flames. Spilled material may make surfaces slippery.

Protect drains from potential spills to minimise contamination. Do not wash product into drainage system. In the case of large spills contact the appropriate authorities. In the case of spillage on water, prevent the spread of product by the use of suitable barrier equipment. Recover product from the surface. Protect environmentally sensitive areas and water supplies.

Absorb into dry earth or sand.

Materials: dry earth or sand

Avoid contact with eyes. If splashing is likely to occur wear a full face visor or chemical goggles as appropriate. Avoid frequent or prolonged skin contact with fresh or used product. Good working practices, high standards of personal hygiene and plant cleanliness must be maintained at all times. Wash hands thoroughly after contact. Use disposable cloths and discard when soiled. Do not put soiled cloths into pockets. Use a suitable barrier cream at regular intervals.

Keep out of the reach of children. Store under cover away from heat and sources of ignition.

Good working practices, high standards of personal hygiene and plant cleanliness must be maintained at all times. Wash hands thoroughly after contact.

Store under cover away from heat and sources of ignition.

Use local exhaust ventilation to control mists or vapours.

Nitrile or neoprene protective gloves

Safety glasses

Protective clothing

Stable under normal conditions of use

No dangerous reactions known

None known

high temperatures

strong oxidising agents

Thermal decomposition products will vary with conditions. Incomplete combustion will generate products smoke, carbon dioxide and hazardous gases, including carbon monoxide.