Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FRAGOL HYDRAULIC P 46 FG
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Hydraulic fluid Industrial use Professional use
Uses advised against
Do not use for private purposes (household)
Manufacturers & Suppliers
FRAGOL AG
manufacturer
Solinger Straße 16, D-45481 Mülheim, Germany
+49 (0)208-300 02-40
http://www.fragol.de
Emergency Contacts
Emergency Contact
+49 (0) 208-300 02-40
Mon-Fri 09:00 - 17:00
Giftnotruf der Charité - Universitätsmedizin Berlin
+49 30 30 686 700
24/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product does not contain (other) ingredients which are classified according to present knowledge of the supplier and contribute to the classification of the product and hence require reporting in this section.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Benzenamine, N-phenyl-, reaction products with 2,4,4-trimethylpentene EC: 270-128-1 | 68411-46-1 | 1% | Yes |
| O,O,O-triphenyl phosphorothioate EC: 209-909-9 | 597-82-0 | 1% | Yes |
Notes
All the percentages given are percentages by weight unless stated otherwise.
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician.
Take off contaminated clothing. Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Irrigate copiously with clean, fresh water for at least 15 minutes, holding the eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting. Call a POISON CENTER or doctor if you feel unwell.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical advice. If breathing is irregular or stopped, immediately seek medical assistance. In case of respiratory tract irritation, consult a physician. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Call a POISON CENTER or doctor if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray; Dry extinguishing powder; Carbon dioxide (CO2); Co-ordinate firefighting measures to the fire surroundings.
Water jet.
During fire hazardous fumes/smoke could be produced.
In case of fire and/or explosion do not breathe fumes. Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Self-contained breathing apparatus (EN 133). Standard protective clothing for firefighters.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety. Ventilate affected area.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Absorb with liquid-binding material (sand, diatomite, diatomaceous earth, acid binder, universal binder, sawdust).
Materials: sand, diatomite, diatomaceous earth, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use local and general ventilation. Use only in well-ventilated areas. Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Store in a well-ventilated place. Keep container tightly closed. Protect against external exposure, such as Heat. High temperatures. UV-radiation/sunlight.
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
measures to prevent fire
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation. Provide eyewash stations and safety showers at the workplace.
Wear suitable gloves. Check leak-tightness/impermeability prior to use. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Chemical protection gloves are suitable, which are tested according to EN 374. ATTENTION: Wearing moisture-proof gloves (occlusion) for longer than 4 hours is defined as a risk in Germany. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. - type of material: Nitrile rubber - material thickness: Use gloves with a minimum material thickness: ≥ 0,38 mm. - breakthrough time of the glove material: Use gloves with a minimum breakthrough time of the glove material: >480 minutes (permeation: level 6).
Use safety goggle with side protection (EN 166).
In case of inadequate ventilation wear respiratory protection. Full face mask/half mask/quarter mask (EN 136/140). Breathing apparatus only in case of aerosol or mist formation.
Protective clothing (EN 340 & EN ISO 13688).
Take appropriate precautions to avoid uncontrolled release into the environment. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
This material is not reactive under normal ambient conditions.
No known hazardous reactions.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Oxidisers.
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.2 Persistence and degradability
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance does not contain PBT or vPvB substances at concentrations of 0.1% or higher.
12.6 Endocrine disrupting properties
Does not contain an endocrine disruptor (ED) at a concentration of ≥ 0,1%.
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not empty into drains. Avoid release to the environment.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Transport Class
- 9
- Packing Group
- III
Provisions for dangerous goods (ADR) should be complied within the premises.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FRAGOL HYDRAULIC P 46 FG?
The signal word is no signal word.
What is the physical form of FRAGOL HYDRAULIC P 46 FG?
FRAGOL HYDRAULIC P 46 FG is a liquid with colourless to yellow color. It has characteristic odor.
What is FRAGOL HYDRAULIC P 46 FG used for?
Hydraulic fluid Industrial use Professional use
What are the hazard statements for FRAGOL HYDRAULIC P 46 FG?
This substance has 1 hazard statement:
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of FRAGOL HYDRAULIC P 46 FG?
The melting point is not determined and the boiling point is not determined.