Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SOLVETRON
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleansing product Degreasing agent Detergent according to Regulation (EC) No 648/2004
Uses advised against
No uses advised against known
Manufacturers & Suppliers
Novatio
national supplier
Industrielaan 58, B-2250 Olen
+32 14 25 76 40
Novatech International N.V.
manufacturer
Industrielaan 58, B-2250 Olen
+32 14 85 97 37
Emergency Contacts
BIG
+32 14 58 45 45
24h/24h
EN, FR, DE, NL
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| hydrocarbons, C7, n-alkanes, isoalkanes, cyclics EC: 927-510-4 | --- | 40% | Yes |
| hydrocarbons, C6, isoalkanes, < 5% n-hexane EC: 931-254-9 | --- | 30% | Yes |
| propan-2-ol EC: 200-661-7 | 67-63-0 | 20% | Yes |
| acetone EC: 200-662-2 | 67-64-1 | 20% | Yes |
| n-hexane EC: 203-777-6 | 110-54-3 | 2% | Yes |
| cyclohexane EC: 203-806-2 | 110-82-7 | 0.4% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim into fresh air. In case of respiratory problems, consult a doctor/medical service.
Symptoms: Headache. Dizziness. Drowsiness.
If possible, wipe up/dry remove chemical. Then rinse/shower immediately with (lukewarm) water. If irritation persists, consult a doctor/medical service.
Symptoms: Tingling/irritation of the skin.
Rinse immediately with plenty of water. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation persists, consult a doctor/medical service.
Symptoms: Irritation of the eye tissue.
Rinse mouth with water. If you feel unwell, consult a doctor/medical service. Do not wait for symptoms to occur to consult Poison Center.
Symptoms: Risk of aspiration pneumonia. Nausea. Gastrointestinal complaints.
Immediate Medical Attention
In case of injury and/or intoxication, call the European emergency number 112. In case of respiratory problems, consult a doctor/medical service. If irritation persists, consult a doctor/medical service. If you feel unwell, consult a doctor/medical service. Do not wait for symptoms to occur to consult Poison Center.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Small fire: Quick-acting ABC powder extinguisher, Quick-acting BC powder extinguisher, Quick-acting class B foam extinguisher, Quick-acting CO2 extinguisher. Major fire: Class B foam (not alcohol-resistant).
Small fire: Water (quick-acting extinguisher, reel); risk of puddle expansion. Major fire: Water; risk of puddle expansion.
Upon combustion: CO and CO2 are formed.
Cool tanks/drums with water spray/remove them into safety. Do not move the load if exposed to heat. Take account of environmentally hazardous firefighting water. Use water moderately and if possible collect or contain it.
Firefighter Protection
Gloves (EN 374). Protective goggles (EN 166). Head/neck protection. Protective clothing (EN 14605 or EN 13034). Large spills/in enclosed spaces: self-contained breathing apparatus (EN 136 + EN 137). Large spills/in enclosed spaces: gas-tight suit (EN 943). Heat/fire exposure: self-contained breathing apparatus (EN 136 + EN 137).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep upwind. Seal off low-lying areas. Close doors and windows of adjacent premises. Stop engines and no smoking. No naked flames or sparks. Spark- and explosionproof appliances and lighting equipment. Keep containers closed.
Large spills/in enclosed spaces: self-contained breathing apparatus (EN 136 + EN 137). Large spills/in enclosed spaces: gas-tight suit (EN 943).
Contain released product, collect/pump into suitable containers. Plug the leak, cut off the supply. Dam up the liquid spill. Try to reduce evaporation. Prevent soil and water pollution. Prevent spreading in sewers.
Clean contaminated surfaces with an excess of water.
Materials: water
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use spark-/explosionproof appliances and lighting system. Take precautions against electrostatic charges. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Observe normal hygiene standards. Remove contaminated clothing immediately. Keep container tightly closed. Dry and preheat installation before use.
Keep container tightly closed.
Observe normal hygiene standards. Remove contaminated clothing immediately.
Keep away from naked flames/heat. Keep away from ignition sources/sparks. Use spark-/explosionproof appliances and lighting system.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use spark-/explosionproof appliances and lighting system. Take precautions against electrostatic charges. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Measure the concentration in the air regularly. Work under local exhaust/ventilation.
Protective gloves against chemicals (EN 374). Materials: butyl rubber, Measured breakthrough time: >480 minutes, Thickness: 0.7 mm, Protection index: Class 6, Remark: Good resistance
Protective goggles (EN 166).
Full face mask with filter type A at conc. in air > exposure limit.
Head/neck protection. Protective clothing (EN 14605 or EN 13034).
See sections 6.2, 6.3 and 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
May be ignited by sparks. Gas/vapour spreads at floor level: ignition hazard.
No data available.
Use spark-/explosionproof appliances and lighting system. Take precautions against electrostatic charges. Keep away from naked flames/heat. Keep away from ignition sources/sparks.
Oxidizing agents, reducing agents, (strong) acids, (strong) bases.
Upon combustion: CO and CO2 are formed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- flammable liquid, n.o.s. (hydrocarbons, C7, n-alkanes, isoalkanes, cyclics; hydrocarbons, C6, isoalkanes, < 5% n-hexane; propan-2-ol)
- Transport Class
- 3
- Packing Group
- II
274
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SOLVETRON?
The signal word is danger.
What is the physical form of SOLVETRON?
SOLVETRON is a liquid with no data available on colour color. It has characteristic odour odor.
What is the solubility of SOLVETRON?
Water ; insoluble
What is SOLVETRON used for?
Cleansing product Degreasing agent Detergent according to Regulation (EC) No 648/2004
What are the hazard statements for SOLVETRON?
This substance has 6 hazard statements:
- H225: Highly flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of SOLVETRON?
The melting point is No data available in the literature and the boiling point is 57 °C - 95 °C.