Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FIS VW High Speed 380 C
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
composite mortar
Uses advised against
Observe technical data sheet.
Manufacturers & Suppliers
fischerwerke GmbH & Co. KG
manufacturer
Klaus-Fischer-Straße 1 D-72178 Waldachtal
+49(0)7443 12-0
http://www.fischer.de
fischer Fixing (UK) Ltd
distributor
Hithercroft Road Wallingford, Oxfordshire, OX10 9AT
+44 01491 827 920
http://www.fischer.co.uk
Emergency Contacts
Emergency Contact
+49(0)6132-84463
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| portland cement EC: 266-043-4 | 65997-15-1 | 10 - 25% | Yes |
| tetramethyldimethacrylat EC: 218-218-1 | 2082-81-7 | 2.5 - 10% | Yes |
| 2-hydroxypropyl methacrylate EC: 248-666-3 | 27813-02-1 | 2.5% | Yes |
| dibenzoyl peroxide EC: 202-327-6 | 94-36-0 | 2.5% | Yes |
| 2-methylisothiazol-3(2H)-one EC: 220-239-6 | 2682-20-4 | 0.01% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In case of respiratory tract irritation, consult a physician.
After contact with skin, wash immediately with plenty of water and soap. Do NOT use solvents or thinners.
Remove contact lenses. In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Let water be drunken in little sips (dilution effect). Do NOT induce vomiting.
Immediate Medical Attention
In case of accident or unwellness, seek medical advice immediately. In case of respiratory tract irritation, consult a physician. In case of contact with eyes, consult an ophthalmologist. If accidentally swallowed, obtain immediate medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
spray mist, (water), Water spray jet, alcohol resistant foam, carbon dioxide, Extinguishing powder
Full water jet
Heating or fire can release toxic gas.
Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
In case of fire: Wear self-contained breathing apparatus. For the protection against direct skin contact, body protective clothing is essential (in addition to the usual working clothes).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protection equipment (refer to section 8). Remove all sources of ignition. Ensure adequate ventilation, especially in confined areas.
The product should not be allowed to enter drains, water courses or the soil. Prevent spread over a wide area (e.g. by containment or oil barriers).
Allow stiffening. Take up mechanically.
Related Products
Similar products with comparable safety profiles
FIS VW 380 C Component A (Mortar)
UFI: 45Y0-U01E-K00A-05Y0
FIS V 360 S - FIS V 950 S (mortar)
---
Vitec 4000
---
V-382 Red
---
HDS 400 CF
---
TEROSON RB 3255 VW-25 known as TEROSTAT 3255 VW-25 FA250
---
HITEC® 8483 Performance Additive
UFI: 20VK-HM0G-051T-AX1U
ULTRACUT EVO 280
UFI: MUC0-Q0X8-800N-PGE3
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Caution: During machining in cured state dust is formed. Keep container tightly closed.
Keep container tightly closed and dry. Store in accordance with local regulations.
When using do not eat, drink or smoke. Wash hands before breaks and after work. Take off contaminated clothing and wash it before reuse.
No special measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation.
Health injuries are not known or expected under normal use. For prolonged or repeated contact use protective gloves. May cause sensitization of susceptible persons by skin contact. Avoid contact with eyes and skin. Suitable material: Protective gloves complying with EN 374. Butyl caoutchouc (butyl rubber), CR (polychloroprene, chloroprene rubber), NBR (Nitrile rubber), Fluorinated rubber. Unsuitable material: PVC or rubber gloves are not recommended. Material thickness: adjust to application and duration of use. Break through time: > 120 min. Remarks: Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). Note: Replace when worn.
Wear closely fitting protective glasses in case of splashes. Safety glasses with side-shields conforming to EN166
Usually no personal respirative protection necessary. In case of inadequate ventilation wear respiratory protection.
Long sleeved clothing. Note: Choose body protection according to the amount and concentration of the dangerous substance at the work place.
No special environmental measures are necessary. see section 6/7
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and applied as directed.
No hazardous reaction when handled and stored according to provisions.
No hazardous reaction when handled and stored according to provisions.
Strong acids and oxidizing agents
No known hazardous decomposition products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FIS VW High Speed 380 C?
The signal word is danger.
What is the physical form of FIS VW High Speed 380 C?
FIS VW High Speed 380 C is a paste with grey color. It has characteristic odor.
What is FIS VW High Speed 380 C used for?
composite mortar
What are the hazard statements for FIS VW High Speed 380 C?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
What is the melting point of FIS VW High Speed 380 C?
The melting point is No data available and the boiling point is No data available.