Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SOLUSCOPE A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Instrument Care
Manufacturers & Suppliers
ECOLAB PTY LTD
manufacturer
2 Drake Avenue Macquarie Park, NSW Australia 2113
1 800 022 002
Emergency Contacts
Emergency Contact
1800 205 506
Emergency Contact
+64 7 958 2372
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| sodium hydroxide | 1310-73-2 | 0.1 - 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Get medical attention if symptoms occur.
Product AS SOLD: Wash off immediately with plenty of water for at least 15 minutes. Use a mild soap if available. Get medical attention if irritation develops and persists. Product AT USE DILUTION: Rinse with plenty of water.
Product AS SOLD: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention. Product AT USE DILUTION: Rinse with plenty of water.
Contact the Poison's Information Centre (eg Australia 13 1126; New Zealand 0800 764 766). Rinse mouth. Get medical attention if symptoms occur.
Immediate Medical Attention
Get medical attention if symptoms occur.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
None known.
Not flammable or combustible.
In the event of fire and/or explosion do not breathe fumes.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure clean-up is conducted by trained personnel only. Refer to protective measures listed in sections 7 and 8. Stop leak if safe to do so.
dike spilled material or otherwise contain material to ensure runoff does not reach a waterway.
Do not allow contact with soil, surface or ground water.
Collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Flush away traces with water.
Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Wash hands thoroughly after handling. In case of mechanical malfunction, or if in contact with unknown dilution of product, wear full Personal Protective Equipment (PPE).
Keep out of reach of children. Keep container tightly closed. Store in suitable labeled containers.
Wash hands thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good general ventilation should be sufficient to control worker exposure to airborne contaminants.
Product AS SOLD: Wear the following personal protective equipment: - Standard glove type. - Neoprene gloves - Nitrile - Natural rubber - Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. Product AT USE DILUTION: No special protective equipment required.
Product AS SOLD: Safety glasses with side-shields. Product AT USE DILUTION: No special protective equipment required.
Refer to AS/NZS 1715 and AS/NZS 1716 for selection, use and maintenance of respiratory protective equipment as applicable. No personal respiratory protective equipment normally required.
No special protective equipment required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
None known.
None known.
In case of fire hazardous decomposition products may be produced such as: Carbon oxides, Oxides of phosphorus
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SOLUSCOPE A?
The signal word is warning.
What is the physical form of SOLUSCOPE A?
SOLUSCOPE A is a liquid appearing as liquid with clear, colourless color. It has alcohol-like odor.
What is SOLUSCOPE A used for?
Instrument Care
What are the hazard statements for SOLUSCOPE A?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of SOLUSCOPE A?
The melting point is no data available and the boiling point is 100 °C.