NextSDS Logo
Safety Data Sheet EN

Polyurethane Dispersion PU 52

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Polyurethane Dispersion PU 52
Product Code
76805

Regulatory Identifiers

CAS Number
N/A
UFI Code
XXQ0-A021-500J-FQUN

Identified Uses

Binding agent

Manufacturers & Suppliers

Kremer Pigmente GmbH & Co. KG logo

Kremer Pigmente GmbH & Co. KG

manufacturer

Hauptstr. 41-47, 88317 Aichstetten, Germany

+49 7565 914480

http://www.kremer-pigmente.com

Emergency Contacts

Emergency Contact

+49 7565 914480

Mon-Fri 8:00 - 17:00

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H335

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.

Precautionary Statements

P261 Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P264 Wash thoroughly after handling.
P280 Wear protective gloves/ clothing/ eye/ face protection.
P304 + P340 If inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P312 Call a poison center or physician if you feel unwell.
P337 + P313 If eye irritation persists: Get medical advice/ attention.
P403 + P233 Store in a well ventilated place. Keep container tightly closed.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

The data for this section has not been processed yet.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. Consult physician if symptoms persist.

Symptoms: irritates the respiratory system.

Skin contact

Wash with soap and rinse with plenty of water.

Symptoms: causes skin irritation.

Eye contact

Remove contact lens. Protect unharmed eye. In case of continued complaints consult a specialist.

Symptoms: causes serious eye irritation.

Ingestion

Keep airways free. Do not give milk or alcoholic beverages to drink. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, extinguishing powder, water jet. Use extinguishing media for surrounding fire.

Specific hazards

No hazardous combustion products known.

Instructions

Usual measures for chemical fires.

Firefighter Protection

Wear self-contained respiratory protective device.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Prevent contamination of soils, drains and surface water.

Cleanup methods

Wipe up with adsorbant material (e.g cloth, fleece).

Materials: adsorbant material (e.g cloth, fleece)

—

Related Products

Similar products with comparable safety profiles

P

Polyurethane Resin UR5638, Part B

---

U

UNEX thermoplastic polyurethane

---

T

Touch N Seal Quick Cure High Yield PU Straw Foam

---

P

Premium Polyurethane Construction Adhesive Sealant - White

---

P

Premium Polyurethane Construction Adhesive Sealant - Gray

---

P

Polyetherol 90512

CAS: 25322-68-3

T

Touch N Seal Quick Cure Cylinder High Yield Low GWP PU Foam Sealant

---

T

Touch N Seal Quick Cure Cylinder High Yield PU Foam Sealant

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing.

Storage

Keep container tightly closed

Hygiene

Do not eat or drink during work. Do not smoke.

Fire prevention

Follow the usual measures for preventive fire protection.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No further measures, see Section 7.

Hands

Protective gloves. The glove material has to be impermeable and resistant to the product / substance / preparation.

Eyes

Tightly fitting safety goggles (EN 166).

Respiratory

In case of good ventilation no personal respiratory protective equipment required.

Skin/Body

Protective clothing.

Environmental

Prevent contamination of open water ways and sewage system. Avoid contamination of ground water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Vapor Pressure
23 hPa (20°C)
Bulk Density
not determined
Freezing Point
---
Evaporation Rate
not applicable
Cloud Point
---
Crystallisation Point
---
Partition Coefficient
not determined
Odor
characteristic
Ph
7.5 - 8.5 (ISO 976)
Properties Status
---
Solubility In Water
completely miscible
Melting Point
ca. 0°C
Decomposition Temperature
not determined
Upper Explosive Limit
not determined
Solubility
---
Explosive Limits
---
Flash Point
not flammable
Vapor Density
not determined
Colour
bright yellow
Auto Ignition Temperature
not applicable
Physical State
liquid
Solidification Point
---
Metal Corrosion
---
Form
liquid
Relative Evaporation Rate
---
Voc Content
---
Odor Threshold
no information available
Kinematic Viscosity
---
Solubility In Fat
---
Molecular Weight
---
Relative Density
---
Appearance
---
Flammability
not applicable
Lower Explosive Limit
not determined
Dynamic Viscosity
20-500 mPa.s (20°C; ISO 2555)
Physical State Data
liquid
Softening Point
---
Density
1.0 - 1.1 g/cm3 (20°C)
Boiling Point
ca. 100°C
State Under Standard Conditions
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable if used according to specifications.

Reactivity

Stable if used according to specifications.

Hazardous reactions

None if handled and stored according to specifications.

Avoid

No information available.

Incompatible

No data available.

Decomposition

No information available.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Aquatic Toxicity

Fish toxicity: Triethylamine: LC50: 24 mg/ml (96h, Oryzias latipes) Triethylamine: NOEC: 3.2 mg/l (60d, Oncorhynchus mykiss)

12.1. Aquatic Toxicity

Fish toxicity: 1,2-Benzisothiazol-3(2H)-one: 16.7 mg/l (96h, Cyprinodon variegatus); LC50: 1.9 mg/l (96h, Oncorhynchus mykiss; OECD 203); NOEC: 0.21 mg/l (96h, Oncorhynchus mykiss; OECD 215)

12.1. Aquatic Toxicity

Fish toxicity: Copper: LC50: 0.0384 mg/l (96h, Pimephales promelas; Read-across)

12.1. Aquatic Toxicity

Daphnia toxicity: Triethylamine: LC50: 17 mg/l (48h, Ceriodaphnia Dubia) Triethylamine: NOEC: 11 mg/l (21d, Daphnia magna)

12.1. Aquatic Toxicity

Daphnia toxicity: 1,2-Benzisothiazol-3(2H)-one: EC50: 2.94 mg/l (48h, Daphnia magna; OECD 202); EC0: 0.643 mg/l (48h, Daphnia magna; OECD 202); EC50: 0.9893 mg/l (96h, Mysidopsis bahia); NOEC: 1.2 mg/l (21d, Daphnia magna; OECD 211); NOEC: 1.9 mg/l (21d; Daphnia magna; OECD 211)

12.1. Aquatic Toxicity

Daphnia toxicity: Reaction compound of 5-Chloro-2-methyl-2H-isothiazole-3-one and 2-Methyl-2H-isothiazole-3-one (3:1): EC50: 0.16 mg/l (48h, Daphnia magna); NOEC: 0.1 mg/l (21d, Daphnia magna)

12.1. Aquatic Toxicity

Bacteria toxicity: Triethylamine: EC50: 95 mg/l (17h, Pseudomonas putida)

12.1. Aquatic Toxicity

Algae toxicity: Triethylamine: EC50: 24.8 mg/l (96h, Desmodus Desmodesmus subspicatus; OECD 201)

12.1. Aquatic Toxicity

Algae toxicity: 1,2-Benzisothiazol-3(2H)-one: ErC50: 0.8 mg/l, NOEC: 0.21 mg/l (72h, Pseudokirchneriella subcapitata; OECD 201); ErC50: 0.36 mg/l, NOEC: 0.15 mg/l (72h, Skeletonema costatum; OECD 201)

12.1. Aquatic Toxicity

Algae toxicity: Reaction compound of 5-Chloro-2-methyl-2H-isothiazole-3-one and 2-Methyl-2H-isothiazole-3-one (3:1): ErC50: 0,037 mg/l (72h, Selenastrum capricornulum)

12.2. Persistence and Degradability

1,2-Benzisothiazol is readily biodegradable.

12.3. Bioaccumulation

12.3. Bioaccumulation

Triethylamine: log POW: 1.45 (25°C)

12.3. Bioaccumulation

1,2-Benzisothiazol-3(H)-one: log POW: 0.7 (20°C)

12.3. Bioaccumulation

Reaction compound of: 5-Chloro-2-methyl-2H-isothiazole-3-one and 2-Methyl-2H-isothiazole-3-one (3:1): log POW: -0.71 - 0.75 (OECD 107)

12.4. Mobility

No information available.

12.5. Results of PBT- und vPvP Assessment

This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1 % or higher.

The substance/mixture does not contain PBT or vPvB components at levels of 0.1% or higher.

12.6. Endocrine Disrupting Properties

This substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delgated Regulation (EU) No. 2017/2100 or Commission Regulator (EU) 2018/605 at levels of 0.1 % or higher.

The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated Regulation (EU) No. 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1 % or higher.

12.7. Other Adverse Effects

Water hazard class: 1, slightly hazardous Do not let product contaminate ground water, waterways or sewage system. Behaviour in sewage systems: Further ecological effects: AOX Value:

The product is classified as water hazard class 1 (slightly hazardous). It should not be allowed to contaminate ground water, waterways, or sewage systems.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Must not be disposed together with household garbage. Dispose of according to official national and local regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed

The employment restrictions for expectant and nursing mothers in accordance with the Maternity Protection Guideline are to be observed.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Polyurethane Dispersion PU 52?

The signal word is warning.

What is the physical form of Polyurethane Dispersion PU 52?

Polyurethane Dispersion PU 52 is a liquid with bright yellow color. It has characteristic odor.

What is Polyurethane Dispersion PU 52 used for?

Binding agent

What are the hazard statements for Polyurethane Dispersion PU 52?

This substance has 3 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.

What is the melting point of Polyurethane Dispersion PU 52?

The melting point is ca. 0°C and the boiling point is ca. 100°C.