UNEX thermoplastic polyurethane

Remove exposed person to fresh air if adverse effects are observed.

Wash with plenty of soap and water. Get medical attention if irritation develops. Launder contaminated clothing before reuse. For contact with molten product, do not remove contaminated clothing. Flush skin immediately with large amounts of cold water. If possible submerge area in cold water. Pack with ice. DO NOT attempt to peel polymer from skin. Seek medical attention immediately.

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention. If hot melted material should splash into the eyes, flush eyes immediately with water for 15 minutes while holding the eyelids open. See a physician for treatment.

Treat symptomatically. Get medical attention.

Water spray, dry chemical, foam.

CO2 may be ineffective on large fires.

Solid does not readily release flammable vapors. Thermoplastic polymers can burn. Protect product from flames; maintain proper clearance when using heat devices, etc. Irritating or toxic substances will be emitted upon burning, combustion or decomposition. Large masses of molten polymer held at elevated temperatures for extended periods of time may auto-ignite.

Take precautions to avoid release to the environment. Prevent from entering into soil, ditches, sewers, waterways and/or groundwater.

Pick up free solid for recycle and/or disposal.

Loading and unloading operations may cause nuisance dust to form. Conduct any operations emitting fumes or vapors (including thermo-forming, heat joining, cutting and or sealing of articles and clean up) under well-ventilated conditions. Avoid breathing process vapors. Do not hold product for extended periods of time at elevated temperatures or allow thick masses of hot polymer to accumulate. Do not taste, swallow, or chew products. Wash thoroughly after processing. Do not store or consume food in processing areas. Impervious gloves should be worn during cleanup operations. Electrostatic buildup may occur when pouring or transferring this product. Always transfer product by means which avoid static buildup.

Store in well ventilated place. Use good housekeeping measures to prevent dust accumulations.

Wash thoroughly after processing. Do not store or consume food in processing areas.

Electrostatic buildup may occur when pouring or transferring this product from its container. The spark produced may be sufficient to ignite vapors of flammable liquids. Always transfer product by means which avoid static buildup.

Prevent inhalation by providing effective general and, when necessary, local exhaust ventilation to draw spray, aerosol, fume, mist, or vapor away from workers.

If contact with the material may occur wear chemically protective gloves.

Safety Glasses.

Under normal use conditions, respirator is not usually required. Use appropriate respiratory protection if the recommended exposure limit is exceeded, or if exposure to vapors is likely. Cutting operations may create small particles from this product. If inhalation of particles cannot be avoided, wear a dust respirator. Consult with an industrial hygienist to determine the appropriate respiratory protection for your specific use of this material. A respiratory protection program compliant with all applicable regulations must be followed whenever workplace conditions require the use of a respirator.

Use good industrial hygiene practices to avoid skin contact. Gloves, coveralls, apron, boots as necessary to minimize contact. Do not wear rings, watches or similar apparel that could entrap the material and cause a skin reaction.

See section 6 for details.

Material is normally stable at moderately elevated temperatures and pressures.

Will not occur.

Not determined.

None known, avoid contact with reactive chemicals.

Smoke, carbon monoxide, carbon dioxide, aldehydes and other products of incomplete combustion. Under combustion conditions, oxides of the following elements will be formed: nitrogen. May also include isocyanates and small amounts of hydrogen cyanide.

Review classification requirements before shipping materials at elevated temperatures.

Review classification requirements before shipping materials at elevated temperatures.

Review classification requirements before shipping materials at elevated temperatures.