Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Polyol PX 70
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Manufacture of substances, Distribution and storage, Formulations. Use in paints, in lacquers, in polishes, in wax-blends. Manufacture: of oligomers, of polymers. Use in paints, in lacquers, in polishes, in wax-blends, in laboratories. Use in paints, in lacquers, in polishes, in wax-blends. Chemical intermediate
Uses advised against
Not identified.
Manufacturers & Suppliers
Perstorp Specialty Chemicals AB
manufacturer
SE-284 80 Perstorp, Sweden
+46 435 380 00
http://www.perstorp.com
Emergency Contacts
Emergency Contact
(+)1 760 476 3961
Emergency Contact
(+)44 8 08 189 0979
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Reaction mass of 1,3-propanediol, 2-(hydroxymethyl)-2-[(methoxymethoxy)methyl]- and 1,3-dioxane-5,5-dimethanol EC: 911-819-6 | --- | 55 - 65% | No |
| Water EC: 231-791-2 | 7732-18-5 | 25 - 35% | No |
| Pentaerythritol EC: 204-104-9 | 115-77-5 | 1 - 5% | No |
Full text of H- and EUH-phrases: see section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
First aid measures not required, but get fresh air for personal comfort.
First aid measures not required, but wash exposed skin with soap and water for hygienic reasons.
Rinse thoroughly with plenty of water, also under the eyelids.
Rinse mouth then drink plenty of water.
Immediate Medical Attention
If a large quantity has been ingested or you feel unwell, get medical advice/attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet.
Thermal decomposition can lead to release of irritating and toxic gases and vapours: Carbon monoxide (CO). Carbon dioxide (CO2).
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. In case of major spill contact the rescue services.
Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers.
In case of major spill contact the rescue services.
Do not allow into any sewer, on the ground or into any body of water.
Clean contaminated surface thoroughly.
Materials: Water (with cleaning agent)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protection recommended in Section 8.
Keep container tightly closed in a dry and well-ventilated place.
Handle in accordance with good industrial hygiene and safety practice.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation.
Protective gloves not really required. However, we recommend using protective gloves made of rubber. PPE - Glove material: Wear protective Neoprene™ gloves, Nitrile rubber, NBR.
Wear safety glasses with side shields (or goggles).
None under normal use conditions.
Normal work clothes for the chemical industry (long legs and sleeves).
Not applicable.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
There exists no specific test data for this product. For further information, see the subsequent subsections of this chapter.
No dangerous reactions known under normal conditions of use.
None known.
None known.
None under normal use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Low toxicity to aquatic organisms.
12.1. Toxicity
12.2. Persistence and degradability
The substance is not readily biodegradable.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
The product is not expected to bioaccumulate based on the partition coefficients of its ingredients.
12.3. Bioaccumulative potential
12.4. Mobility in soil
The product is not expected to adsorb to a high degree to suspended solids and sediment based upon the log Pow.
12.5. Results of PBT and vPvB assessment
The components in this formulation do not meet the criteria for classification as PBT or vPvB.
12.6. Other adverse effects
No information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Incinerate at a licensed installation.
Incinerate at a licensed installation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
International Regulations Not applicable.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Polyol PX 70?
The signal word is no signal word.
What is the physical form of Polyol PX 70?
Polyol PX 70 is a liquid appearing as liquid amber with amber color. It has weak characteristic odor.
What is Polyol PX 70 used for?
Manufacture of substances, Distribution and storage, Formulations. Use in paints, in lacquers, in polishes, in wax-blends. Manufacture: of oligomers, of polymers. Use in paints, in lacquers, in polishes, in wax-blends, in laboratories. Use in paints, in lacquers, in polishes, in wax-blends. Chemical intermediate
What is the melting point of Polyol PX 70?
The melting point is Not determined and the boiling point is > 300 °C.