NextSDS Logo
Safety Data Sheet EN

Polyol mixture 270/61

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Polyol mixture 270/61

Regulatory Identifiers

CAS Number
N/A
UFI Code
WTRD-D5HS-A00R-TH65

Identified Uses

polyurethane component

Manufacturers & Suppliers

B

BASF ITALIA S.p.A.

national supplier

Via Marconato 8, 20811 Cesano Maderno (MB), ITALY

B

BASF SE

manufacturer

67056 Ludwigshafen, GERMANY

+49 621 60-0

Emergency Contacts

Emergency Contact

+49 180 2273-112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Sens. Cat. 1 H317
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P273 Avoid release to the environment.
P280 Wear protective gloves, protective clothing and eye protection or face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P363 Wash contaminated clothing before reuse.
P501 Dispose of contents and container to hazardous or special waste collection point.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Preparation based on: polyesterpolyol, additives

Chemical Name CAS Number Concentration Hazardous
2-octyl-2H-isothiazol-3-one EC: 247-761-7 26530-20-1 0.05 - 0.25% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Keep patient calm, remove to fresh air, seek medical attention.

Skin contact

Wash thoroughly with soap and water

Eye contact

Wash affected eyes for at least 15 minutes under running water with eyelids held open.

Ingestion

Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.

Medical Treatment

Treat according to symptoms (decontamination, vital functions)

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

water spray, dry powder, foam, carbon dioxide

Specific hazards

The substances/groups of substances mentioned can be released in case of fire.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective clothing.

Small spill

Pick up with suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr).

Large spill

Pump off product.

Environmental

Do not empty into drains. Do not discharge into the subsoil/soil.

Cleanup methods

Pick up with suitable absorbent material

—

Related Products

Similar products with comparable safety profiles

P

Polyol G 18 A

---

P

Polyol G 18 A

---

P

Polyol R3540

CAS: 50586-59-9

P

Polyol PX 70

---

P

Polyol polyester

---

P

Polyol-Crosslinker 90124

UFI: DXMX-72A2-E00W-G1ST

C

Complex polyol ester

---

C

Complex polyol ester

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Storage

Keep container tightly closed.

Fire prevention

No special precautions necessary.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Suitable chemical resistant safety gloves (EN ISO 374-1) also with prolonged, direct contact (Recommended: Protective index 6, corresponding >480 minutes of permeation time according to EN ISO 374-1): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc.

Eyes

Safety glasses with side-shields (frame goggles) (e.g. EN 166)

Respiratory

Respiratory protection in case of vapour/aerosol release. Combination filter for gases/vapours of organic compounds and solid and liquid particles (f.e. EN 14387 Type A-P2)

Skin/Body

Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).

Environmental

For information regarding environmental exposure controls, see Section 6.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
amber
Colour Intensity
---
Form
liquid
Odor
amine-like
Odor Threshold
not applicable
Ph
7 - 9 (20 °C)
Melting Point
---
Boiling Point
> 140 °C (1,013 hPa)
Flash Point
> 100 °C (DIN 51758)
Freezing Point
---
Softening Point
---
Solidification Point
< 0 °C
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Value can be approximated from Henry's Law Constant or vapor pressure.
Vapor Pressure
10 mbar (20 °C)
Vapor Density
---
Relative Density
1.20 (20 °C)
Bulk Density
---
Density
1.2 g/cm3 (20 °C)
Flammability
not flammable (derived from flash point)
Upper Explosive Limit
For liquids not relevant for classification and labelling.
Lower Explosive Limit
For liquids not relevant for classification and labelling., The lower explosion point may be 5 - 15 °C below the flash point.
Explosive Limits
---
Auto Ignition Temperature
> 250 °C
Decomposition Temperature
No decomposition if stored and handled as prescribed/indicated.
Solubility
---
Partition Coefficient
not applicable for mixtures, Study scientifically not justified.
Solubility In Water
sparingly soluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
No corrosive effect on metal.
Dynamic Viscosity
2,200 mPa.s (50 °C)
Kinematic Viscosity
not determined
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable.

Reactivity

No hazardous reactions if stored and handled as prescribed/indicated. Corrosion to metals: No corrosive effect on metal. Flammable gases: no. Toxic gases: no.

Hazardous reactions

No hazardous reactions if stored and handled as prescribed/indicated.

Avoid

Temperature: < 0 °C

Incompatible

acids, oxidizing agents, isocyanates

Decomposition

No hazardous decomposition products if stored and handled as prescribed/indicated.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Assessment of aquatic toxicity: Acutely harmful for aquatic organisms. May cause long-term adverse effects in the aquatic environment. Information on:2-octyl-2H-isothiazol-3-one Toxicity to fish:

Acutely harmful for aquatic organisms. May cause long-term adverse effects in the aquatic environment.

12.1. Toxicity

Toxicity to fish: LC50 (96 h) 0.036 mg/l, Oncorhynchus mykiss (OECD Guideline 203, Flow through.)

12.1 Toxicity

Information on:2-octyl-2H-isothiazol-3-one Aquatic invertebrates:

12.1. Toxicity

Aquatic invertebrates: LC50 (48 h) 0.180 mg/l, Daphnia sp. (other, static) Nominal concentration. The product has low solubility in the test medium. An aqueous solution prepared with solubilizers has been tested. Information on:2-octyl-2H-isothiazol-3-one Aquatic plants: No observed effect concentration (72 h) 0.004 mg/l, Desmodesmus subspicatus (OECD Guideline 201)

12.2. Persistence and degradability

Assessment biodegradation and elimination (H2O): Poorly biodegradable. Elimination information: Poorly biodegradable.

Poorly biodegradable.

12.3. Bioaccumulative potential

Assessment bioaccumulation potential: Does not significantly accumulate in organisms.

Does not significantly accumulate in organisms.

12.4. Mobility in soil

Assessment transport between environmental compartments: Adsorption in soil: Adsorption to solid soil phase is not expected.

12.5. Results of PBT and vPvB assessment

According to Annex XIII of Regulation (EC) No.1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH): The product does not contain a substance fulfilling the PBT (persistent/bioaccumulative/toxic) criteria.

The product does not contain a substance fulfilling the PBT (persistent/bioaccumulative/toxic) criteria.

12.1 Toxicity

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6. Endocrine disrupting properties

The product does not contain a substance that is considered to have endocrine disrupting properties according to EU REACH Article 57(f).

The product does not contain a substance that is considered to have endocrine disrupting properties according to EU REACH Article 57(f).

12.7 Other adverse effects

12.7. Other adverse effects

The product does not contain substances that are listed in Regulation (EC) 1005/2009 on substances that deplete the ozone layer.

The product does not contain substances listed in Regulation (EC) 1005/2009 on substances that deplete the ozone layer.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Incinerate in suitable incineration plant, observing local authority regulations.

Disposal

Incinerate in suitable incineration plant, observing local authority regulations.

Waste Codes

07 02 08 other still bottoms and reaction residues EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed

If it is intended to use materials for the manufacture of consumer goods (e. g. products which will come into contact with foodstuffs or with the skin, toys) or medical products, national and international regulations have to be observed. Where no regulations exist, consumer goods or medical products must at least comply with European legislation.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Polyol mixture 270/61?

The signal word is warning.

What is the physical form of Polyol mixture 270/61?

Polyol mixture 270/61 is a liquid with amber color. It has amine-like odor.

What is Polyol mixture 270/61 used for?

polyurethane component

What are the hazard statements for Polyol mixture 270/61?

This substance has 2 hazard statements:

  • H317: May cause an allergic skin reaction.
  • H412: Harmful to aquatic life with long lasting effects.