Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Polyol R3540
- Chemical Name
- Propylidynetrimethanol, ethoxylated
Regulatory Identifiers
- CAS Number
- 50586-59-9 Check regulations →
- EC Number
- 500-110-3 Check regulations →
- REACH No.
- 01-2119458873-26
Identified Uses
Manufacture of substances. Industrial manufacturing. Distribution and storage. Formulations. Use: in flexible foam, in rigid foam, in coatings, in adhesives, in sealants, in elastomers, in polyamide, in polyimide, in synthetic fibres, in foundry, in thermoplastic polyurethane, in composite materials based on wood, minerals or natural fibres, in other composite materials. Use: in rigid foam, in coatings, in adhesives, in sealants, in other composite materials. Use: in flexible foam, in coatings, in adhesives, in sealants. Chemical intermediate
Uses advised against
Not identified.
Manufacturers & Suppliers
Perstorp Specialty Chemicals AB
manufacturer
SE-284 80 Perstorp, Sweden
+46 435 380 00
http://www.perstorp.com
Emergency Contacts
Emergency Contact
+1 760 476 3961
Emergency Contact
+44 8 08 189 0979
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Propylidynetrimethanol, ethoxylated EC: 500-110-3 | 50586-59-9 | 99% | No |
| Propylidynetrimethanol EC: 201-074-9 | 77-99-6 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Get fresh air for personal comfort.
After contact with the molten/hot product, cool rapidly using water.
In contact with molten product immediately flush with tempered water for at least 15 minutes.
If a large quantity has been ingested or if you feel unwell, get medical advice/attention.
Immediate Medical Attention
In case of injury immediately get medical attention. In the case of skin irritation or allergic reactions see a doctor.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All types of extinguishing media are suitable. Use fire extinguishing methods suitable to surrounding conditions. Small Fire: Carbon dioxide (CO2). Extinguishing powder. Water spray or fog. Large Fire: Water spray or fog. Alcohol resistant foam.
High volume water jet.
Thermal decomposition can lead to release of irritating and toxic gases and vapours.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Small spill
Large spill
Do not allow into any sewer, on the ground or into any body of water. See Section 12 for additional ecological information.
Take up mechanically, placing in appropriate containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment according to section 8 if risk of exposure.
Keep tightly closed in a dry and cool place. Avoid contact with water or humidity. The product is. Hygroscopic.
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Wash contaminated clothing before reuse.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
None under normal use conditions.
Protective gloves not really required. However, we recommend using protective gloves made of rubber. Butyl rubber. Chloroprene rubber, CR. Nitrile rubber, NBR.
If handled where risk of splashes may occur, use safety goggles.
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
Normal work clothes for the chemical industry (long legs and sleeves).
Do not allow into any sewer, on the ground or into any body of water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable at normal conditions.
There exists no specific test data for this product. For further information, see the subsequent subsections of this chapter.
None known.
None known.
None known.
Thermal decomposition can lead to release of irritating and toxic gases and vapours; Carbon monoxide (CO). Carbon dioxide (CO2).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Low toxicity to aquatic organisms.
12.1. Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.2. Persistence and degradability
Not readily biodegradable.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
Not likely to bioaccumulate.
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substance does not meet the criteria for classification as PBT or vPvB.
12.6. Endocrine disrupting properties
This product does not contain any known or suspected endocrine disruptors.
12.7. Other adverse effects
None known.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
International Regulations: Not applicable.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Polyol R3540?
The signal word is no signal word.
What is the physical form of Polyol R3540?
Polyol R3540 is a liquid with colourless color. It has slight odor.
What is Polyol R3540 used for?
Manufacture of substances. Industrial manufacturing. Distribution and storage. Formulations. Use: in flexible foam, in rigid foam, in coatings, in adhesives, in sealants, in elastomers, in polyamide, in polyimide, in synthetic fibres, in foundry, in thermoplastic polyurethane, in composite materials based on wood, minerals or natural fibres, in other composite materials. Use: in rigid foam, in coatings, in adhesives, in sealants, in other composite materials. Use: in flexible foam, in coatings, in adhesives, in sealants. Chemical intermediate
What is the melting point of Polyol R3540?
The melting point is Not applicable and the boiling point is 241 °C (Decomposes, OECD Test No. 103: Boiling Point).