Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Chemart-12198 Z
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Grinding aid for Zircon Sand Processing
Uses advised against
Anything other than the above.
Manufacturers & Suppliers
Chemiartis SA
manufacturer
P.O. Box 186 1028 Préverenges, Switzerland
+41 21 803 07 39
Emergency Contacts
Emergency Contact
+ 41 21 803 07 39
CET (+1 UTC)
EN, FR, DE
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethane-1,2-diol EC: 203-473-3 | 107-21-1 | 60% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
IF INHALED: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing.
Symptoms: Coughing
IF ON SKIN: Wash with plenty of water. If skin irritation occurs: Get medical advice/attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation develops and persists, get medical attention.
IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Do NOT induce vomiting. If vomiting occurs turn patient on side. Do not give milk or alcoholic beverages. Rinse mouth with water but do not swallow. Never give anything by mouth to an unconscious person.
Symptoms: Vomiting, Nausea, Diarrhoea
Immediate Medical Attention
If skin irritation occurs: Get medical advice/attention. If irritation develops and persists, get medical attention. Call a POISON CENTER/doctor if you feel unwell.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
As appropriate for surrounding fire.
Direct water jet may spread the fire.
Product is not classified as flammable, but will burn on contact with flame or exposure to high temperature.
Fight fire with normal precautions from a reasonable distance. Keep containers cool by spraying with water if exposed to fire.
Firefighter Protection
Fire fighters should wear complete protective clothing including self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Caution - spillages may be slippery. Ensure operatives are trained to minimise exposures. Ensure suitable personal protection during removal of spillages. Shut off leaks if without risk. Do not breathe vapour. Avoid all contact. Do not ingest. If swallowed then seek immediate medical assistance.
Allow small spillages to evaporate provided there is adequate ventilation.
Avoid release to the environment.
Adsorb spillages onto sand, earth or any suitable adsorbent material. Transfer to a container for disposal.
Materials: sand, earth or any suitable adsorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure operatives are trained to minimise exposures. Ensure adequate ventilation. Do not breathe vapour. In case of inadequate ventilation wear respiratory protection. Avoid all contact. Do not ingest. If swallowed then seek immediate medical assistance. Wear protective gloves/eye protection. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work.
Keep container tightly closed. Store in a cool/low-temperature, well-ventilated (dry) place away from heat and ignition sources. Store in a cool dry place away from sources of heat and UV light.
Do not eat, drink or smoke when using this product. Wash hands before breaks and after work.
Store away from heat and ignition sources.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. Store in a cool/low-temperature, well-ventilated (dry) place away from heat and ignition sources.
Wear suitable chemical resistant protective gloves for frequent or prolonged operations tested to EN374 with an acceptable permeation test. Contaminated gloves should be carefully rinsed with water before reuse. Breakthrough time of the glove material: refer to the information provided by the gloves’ producer. Recommended: Prolonged, direct contact: Nitrile rubber Minimum thickness: 0.11mm) Protective index 6, corresponding > 480 minutes of permeation time according to EN 374. During splash contact: Nitrile rubber Minimum thickness: 1.11mm) Protective index 6, corresponding > 480 minutes of permeation time according to EN 374
Use eye protection according to EN 166, designed to protect against liquid splashes.
Respiratory protection is not necessary if room is well ventilated. In case of inadequate ventilation wear respiratory protection. A suitable mask with filter type A (EN141 or EN405) may be appropriate.
Wear suitable coveralls to prevent exposure to the skin.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
Risk of explosion: Forms flammable and explosive hydrogen through corrosion of metals (Aluminium), perchloric acid. Risk of ignition or formation of inflammable gases or vapors with: chromyl chloride, Strong oxidising agents. Exothermic reaction with alkalis. Strong exothermic reaction with acids.
Direct heat.
Strong oxidising agents, Strong acids and alkali. Nitric acid
Combustion may cause toxic fumes. (Carbon monoxide, Carbon dioxide).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No ecotoxic effects are known for this product.
12.2 Persistence and degradability
No data for the mixture as a whole.
Persistence and degradability
Bioaccumulative potential
Bioaccumulative potential
Toxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Results of PBT and vPvB assessment
Endocrine disrupting properties
Other adverse effects
Results of PBT and VPVB assessment
The substance is not classified as PBT or vPvB.
12.6 Other adverse effects
No other adverse effects are known.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not allow to enter drains, sewers or watercourses.
Dispose of this material and its container as hazardous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Authorisations and/or Restrictions On Use Not restricted
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Chemart-12198 Z?
The signal word is warning.
What is the physical form of Chemart-12198 Z?
Chemart-12198 Z is a liquid appearing as colorless to light yellow liquid with colorless to light yellow color. It has mild odour odor.
What is the solubility of Chemart-12198 Z?
Soluble in water.
What is Chemart-12198 Z used for?
Grinding aid for Zircon Sand Processing
What are the hazard statements for Chemart-12198 Z?
This substance has 2 hazard statements:
- H302: Harmful if swallowed.
- H373: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of Chemart-12198 Z?
The melting point is -15°C and the boiling point is 192-195°C.