Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- D94099 CHROMATINT LILAC 2799
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Dyestuff, product for industrial use only. Industrial
Uses advised against
No additional information available
Manufacturers & Suppliers
CHROMATECH EUROPE B.V.
manufacturer
Dijkweg 159 2675 AD Honselersdijk The Netherlands
+31(0)174272299
Emergency Contacts
Emergency Contact
+31(0)174272299
This number is serviced during office hours.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This mixture does not contain any substances to be mentioned according to the criteria of section 3.2 of REACH Annex II
First Aid Measures
Emergency procedures for chemical exposure incidents
Take victim to fresh air, in a quiet place and if necessary take medical advice. If unconscious, place in the recovery position and seek medical advice.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. Do not remove clothing if it sticks to the skin.
Rinse immediately with plenty of water, also under the eyelids. Remove contact lenses, if present and easy to do. Continue rinsing.
Rinse mouth out with water.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing media appropriate for surrounding fire. e.g. Water spray. Dry powder. Carbon dioxide (CO2). Alcohol resistant foam.
Strong water jet.
Fire hazard : No fire hazard (Aqueous solution). Explosion hazard : Product is not explosive.
Exercise caution when fighting any chemical fire. Cool tanks/drums with water spray/remove them into safety.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Provide adequate ventilation. Wear suitable respiratory equipment in case of insufficient ventilation. Keep unprotected persons from entering.
Prevent entry to sewers and public waters.
Clean up any spills as soon as possible, using an absorbent material to collect it. Wash away remainder with plenty of water.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid all unnecessary exposure.
Keep container closed when not in use.
Handle in accordance with good industrial hygiene and safety practice. Do not drink, eat or smoke in the workplace.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilate area. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.
Recommended: Chemical resistant gloves (according to European standard NF EN 374 or equivalent), Since the product consists of several substances, it is not possible to estimate the durability of the glove material beforehand and it therefore needs to be tested before use
Recommended: Chemical goggles or safety glasses
No personal breathing protective equipment is normally required
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of use.
No additional information available
No dangerous reactions known.
High temperature.
Oxidizing and reducing agents may destroy the dye.
When exposed to high temperatures may produce hazardous decomposition products such as carbon monoxide and dioxide, smoke, nitrogen oxides (NOx).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The product is not classified as hazardous to the aquatic environment (acute or chronic).
12.2. Persistence and degradability
12.2. Persistence and degradability
Colourants by their nature are stable and not readily biodegradable.
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Remove to an authorized waste treatment plant.
If recycling is not possible, eliminate in accordance with local valid waste disposal regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for D94099 CHROMATINT LILAC 2799?
The signal word is no signal word.
What is the physical form of D94099 CHROMATINT LILAC 2799?
D94099 CHROMATINT LILAC 2799 is a liquid appearing as liquid. with red-violet. color. It has slight. odor.
What is the solubility of D94099 CHROMATINT LILAC 2799?
Water: Miscible
What is D94099 CHROMATINT LILAC 2799 used for?
Dyestuff, product for industrial use only. Industrial
What is the melting point of D94099 CHROMATINT LILAC 2799?
The melting point is ≈ 0 °C and the boiling point is ≈ 100 °C.