Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- D128181
- Product Code
- 73714
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive for car engine lubricating oil
Uses advised against
This material should not be used for any other purpose than that recommended without expert advice.
Manufacturers & Suppliers
INFINEUM FRANCE S.N.C.
manufacturer
Chemin Départemental 54, 13130 BERRE L'ETANG
+33 4 42 74 57 01
http://www.infineum.com
Emergency Contacts
Emergency Contact
04-4274.4690
Emergency Contact
+33-4.4274.4690
Emergency Contact
0221-7499 3355
Emergency Contact
+49-221-7499 3355
Emergency Contact
019-2150 221
Emergency Contact
+39 019-2150 221
Emergency Contact
01235 549777
Emergency Contact
+44 1235 549777
ORFILA
01 45 42 59 59
ORFILA
+33-1 45 42 59 59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| bis(nonylphenyl)amine EC: 253-249-4 | --- | 2.5 - 10% | Yes |
| Phosphorodithioic acid, mixed O,O-bis(1,3-dimethylbutyl and iso-Pr) esters, zinc salts EC: 283-392-8 | --- | 3 - 5% | Yes |
| reaction mass of isomers of: C7-9-alkyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate EC: 406-040-9 | --- | 1 - 2.5% | Yes |
| C14-16-18 Alkyl phenol | --- | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician. If breathing has stopped, assist ventilation with a mechanical device. Do not use mouth-to-mouth resuscitation if exposure to hydrogen sulphide is suspected.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician. In case of burns apply cold water until pain subsides then seek medical advice.
Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists: Get medical advice/ attention.
Clean mouth with water and drink afterwards plenty of water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.
Medical Treatment
Show this safety data sheet to the doctor in attendance. The first aid procedure should be established in consultation with the doctor responsible for industrial medicine.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames
High volume water jet
Not classified as flammable or combustible, but will combust if ignited.
Fire-fighters should exercise extreme caution in enclosed spaces due to the possible presence of toxic decomposition and combustion products.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Self-contained full-face overpressure breathing apparatus should be used in enclosed spaces. Use standard body protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with spilled material. Do not touch or walk through spilled material.
Wipe up with absorbent material (e.g. cloth, fleece).
Dyke far ahead of liquid spill for later recovery and disposal.
See attached ES. Prevent entry into waterways, sewers, basements or confined areas. Prevent further leakage or spillage if safe to do so.
Recover by pumping or with suitable absorbent. Seek the advice of a specialist before using dispersants. Wipe up with absorbent material (e.g. cloth, fleece).
Materials: absorbent material (e.g. cloth, fleece)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations.
Product should be stored below the recommended maximum loading / unloading temperature to avoid degradation of product quality and eventually decomposition.
Smoking, eating and drinking should be prohibited in the application area.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
See attached ES. No special requirements under ordinary conditions of use and with adequate ventilation. If decomposition is suspected, or if the product has been overheated, do not open the container, discontinue heating and secure the unit. Initiate emergency procedures, taking all necessary precautions to avoid exposure to noxious or flammable gases (e.g. hydrogen sulphide), such as evacuation of contaminated areas, and use of suitable respiratory protection.
Polyvinyl alcohol or nitrile- butyl-rubber gloves Before removing gloves clean them with soap and water. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. When handling hot material, use heat resistant gloves. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
The applicable European standard can be found in EN 166. Eye wash bottle with pure water. Tightly fitting safety goggles. Ensure that eyewash stations and safety showers are close to the workstation location.
The applicable European standard can be found in EN 140, EN 137, EN 143, EN 14387.
Impervious clothing. Choose body protection according to the amount and concentration of the dangerous substance at the work place. Long sleeved clothing. The applicable European standard can be found in EN 14605.
See attached ES. Prevent entry into waterways, sewers, basements or confined areas. Local authorities should be advised if significant spillages cannot be contained. Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so. Try to prevent the material from entering drains or water courses. If the product contaminates rivers and lakes or drains inform respective authorities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No dangerous reaction known under conditions of normal use.
No hazards to be specially mentioned.
Excessive heat.
Strong oxidizing agents, water
Hydrogen Sulfide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No data is available on the product itself.
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
Acute toxicity tests on fish, daphnia, and algae indicate that classification criteria for acute aquatic toxicity are not met. However, the substance is assessed as having chronic aquatic toxicity, potentially causing long-lasting harmful effects to aquatic life.
12.2 Persistence and degradability
No data is available on the product itself regarding biodegradability.
12.2 Persistence and degradability
According to the results of tests of biodegradability this product is not readily biodegradable.
12.2 Persistence and degradability
The substance is not readily biodegradable based on OECD 301B test results. Hydrolysis tests indicate low degradation at pH 4, 7, and 9 at 50 °C.
12.2 Persistence and degradability
The substance is not readily biodegradable.
12.3 Bioaccumulative potential
No data is available on the product itself regarding bioaccumulation, and the partition coefficient is not determined.
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The product and its components are not considered to be persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB).
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/ container to an approved waste disposal plant.
The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container. Disposal recommendations based on material as supplied, Disposal must be in accordance with applicable laws and regulations, and material characteristics at time of disposal.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regulation (EC) No. 1907/2006
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for D128181?
The signal word is no signal word.
What is the physical form of D128181?
D128181 is a liquid with brown color. It has hydrocarbon-like odor.
What is D128181 used for?
Additive for car engine lubricating oil
What are the hazard statements for D128181?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of D128181?
The melting point is not determined and the boiling point is not determined.