Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Trimethylolpropane molten CN
- Chemical Name
- Propylidynetrimethanol
Regulatory Identifiers
- CAS Number
- 77-99-6 Check regulations →
Identified Uses
Adhesives, in sealants, in coatings, in inks, in lubricants, in greases in metal working fluids in polishes in wax-blends in laboratories for surface treatment of pigments and pigment concentrates, for polymers and plastics (PVC heat stabilizers). Manufacture: of elastomers, of non-metallic mineral products of polymers including resins of oligomers
Uses advised against
Not identified.
Manufacturers & Suppliers
Shandong Perstorp Chemical Co., Ltd.
manufacturer
No. 76, Yixibei Road, Qilu Chemical Industry Zone, Linzi District, Zibo City, Shandong Province, China, Postcode: 255410
+86 533 7965195
http://www.perstorp.com
Perstorp (Shanghai) Chemical Trading Co Ltd
distributor
Room 1319-38, Shanghai Central Plaza, 381 Middle Huai Hai Road, 200020 Shanghai, China
+86 21 6391 0531
http://www.perstorp.com
Emergency Contacts
Emergency Contact
+86 4001 2001 74
Emergency Contact
+1 760 476 3960
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Propylidynetrimethanol | 77-99-6 | 95 - 100% | No |
No information available.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Rinse mouth with water. If irritation persists get medical advice/attention.
In contact with molten product immediately flush with cold water for at least 10 minutes. Do not pull solidified product off the skin. In case of burn injury immediately get medical attention.
After contact with the molten/hot product, cool rapidly with cold water. Seek immediate medical attention/advice.
Rinse mouth then drink plenty of water. Seek immediate medical attention/advice.
Immediate Medical Attention
In case of burn injury immediately get medical attention. Seek immediate medical attention/advice for eye contact and ingestion.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All types of extinguishing media are suitable. Use fire extinguishing methods suitable to surrounding conditions.
Do not use a solid water stream as it may scatter and spread fire.
Thermal decomposition can lead to release of irritating and toxic gases and vapors.
Firefighter Protection
Wear self-contained breathing apparatus and protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unprotected persons away from molten/hot product if released. Avoid contact with skin, eyes and inhalation of vapors. Use personal protection recommended in Section 8. In case of major spill contact the rescue services.
Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal.
Pump up the product into a spare container suitably labelled.
Do not allow into any sewer, on the ground or into any body of water.
Clean contaminated surface thoroughly. After cleaning, flush away traces with water.
Materials: water
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Not to be used by pregnant workers and workers who have recently given birth or who are breastfeeding. Ensure adequate ventilation. Design work place in such a way that splashes from hot product is prevented. Use personal protection recommended in
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Emergency shower and eye wash facilities must exist on work place. Ensure adequate ventilation.
Wear protective gloves. Ensure that the breakthrough time of the glove material is not exceeded. Refer to glove supplier for information on breakthrough time for specific gloves. Gloves must conform to standard EN 374. /. ANSI/ISEA 105-2016.
Tight sealing safety goggles. Face protection shield.
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. APF 10; 90%.
Wear appropriate personal protective clothing to prevent skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
There exists no specific test data for this product. For further information, see the subsequent subsections of this chapter.
No dangerous reactions known under normal conditions of use.
None under normal use conditions.
None known.
Thermal decomposition can lead to release of irritating and toxic gases and vapors; Carbon monoxide (CO), Carbon dioxide (CO2).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
Low toxicity to aquatic organisms.
12.1 Toxicity
Persistence and degradability
Inherently biodegradable
12.2 Persistence and degradability
Bioaccumulative potential
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Mobility in soil
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regulatory information regarding Chinese national regulations and international environmental agreements for Trimethylolpropane molten.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Trimethylolpropane molten CN?
The signal word is warning.
What is the physical form of Trimethylolpropane molten CN?
Trimethylolpropane molten CN is a liquid appearing as liquid with colorless color. It has slight odor.
What is Trimethylolpropane molten CN used for?
Adhesives, in sealants, in coatings, in inks, in lubricants, in greases in metal working fluids in polishes in wax-blends in laboratories for surface treatment of pigments and pigment concentrates, for polymers and plastics (PVC heat stabilizers). Manufacture: of elastomers, of non-metallic mineral products of polymers including resins of oligomers
What are the hazard statements for Trimethylolpropane molten CN?
This substance has 1 hazard statement:
- H361fd: Suspected of damaging fertility. Suspected of damaging the unborn child
What is the melting point of Trimethylolpropane molten CN?
The melting point is 57-62 °C and the boiling point is 302 °C.