Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Shell Turbo Oil T 32
- Product Code
- 001A9782
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Turbine oil.
Uses advised against
This product must not be used in applications other than those listed in Section 1 without first seeking the advice of the supplier.
Manufacturers & Suppliers
Viva Energy Australia Pty Ltd
manufacturer
720 Bourke Street, Docklands, Victoria 3008, Australia
+61 (0)3 8823 4444
Emergency Contacts
Emergency Contact
1800 651 818
POISONS INFORMATION CENTRE
13 11 26
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Highly refined mineral oils and additives. The highly refined mineral oil contains <3% (w/w) DMSO-extract, according to IP346. Classification based on DMSO extract content < 3% (Regulation (EC) 1272/2008, Annex VI, Part 3, Note L).
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Interchangeable low viscosity base oil (<20,5 cSt @40°C) * | --- | 99% | Yes |
| N-phenyl-1-naphthylamine | 90-30-2 | 0.1 - 0.24% | Yes |
| (4-nonylphenoxy)acetic acid | 3115-49-9 | 0.099% | Yes |
* contains one or more of the following CAS-numbers: 64742-53-6, 64742-54-7, 64742-55-8, 64742-56-9, 64742-65-0, 68037-01-4, 72623-86-0, 72623-87-1, 8042-47-5, 848301-69-9, 68649-12-7, 151006-60-9, 163149-28-8, 64741-88-4, 64741-89-5.
First Aid Measures
Emergency procedures for chemical exposure incidents
No treatment necessary under normal conditions of use. If symptoms persist, obtain medical advice.
Remove contaminated clothing. Flush exposed area with water and follow by washing with soap if available. If persistent irritation occurs, obtain medical attention.
Flush eye with copious quantities of water. Remove contact lenses, if present and easy to do. Continue rinsing. If persistent irritation occurs, obtain medical attention.
In general no treatment is necessary unless large quantities are swallowed, however, get medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, water spray or fog. Dry chemical powder, carbon dioxide, sand or earth may be used for small fires only.
Do not use water in a jet.
Hazardous combustion products may include: A complex mixture of airborne solid and liquid particulates and gases (smoke). Carbon monoxide may be evolved if incomplete combustion occurs. Unidentified organic and inorganic compounds.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Firefighter Protection
Proper protective equipment including chemical resistant gloves are to be worn; chemical resistant suit is indicated if large contact with spilled product is expected. Self-Contained Breathing Apparatus must be worn when approaching a fire in a confined space. Select fire fighter's clothing approved to relevant Standards (e.g. Europe: EN469).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin and eyes. Slippery when spilt. Avoid accidents, clean up immediately.
Use appropriate containment to avoid environmental contamination. Prevent from spreading or entering drains, ditches or rivers by using sand, earth, or other appropriate barriers.
Soak up residue with an absorbent such as clay, sand or other suitable material and dispose of properly.
Materials: clay, sand or other suitable material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid prolonged or repeated contact with skin. Avoid inhaling vapour and/or mists. When handling product in drums, safety footwear should be worn and proper handling equipment should be used. Properly dispose of any contaminated rags or cleaning materials in order to prevent fires.
Keep container tightly closed and in a cool, well-ventilated place. Use properly labeled and closable containers. Store at ambient temperature.
Properly dispose of any contaminated rags or cleaning materials in order to prevent fires. Proper grounding and bonding procedures should be used during all bulk transfer operations to avoid static accumulation.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
The product does not pose any further reactivity hazards in addition to those listed in the following sub-paragraph.
Reacts with strong oxidising agents.
Extremes of temperature and direct sunlight.
Strong oxidising agents.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
The product is considered practically non-toxic to fish, crustaceans, and algae/aquatic plants based on available data, with LL/EL/IL50 values > 100 mg/l. Classification criteria for environmental hazards are not met.
12.1 Toxicity
12.1 Toxicity
M-Factor (Short-term (acute) aquatic hazard) is 1.
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Toxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Results of PBT and vPvB assessment
Endocrine disrupting properties
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recover or recycle if possible. Waste arising from a spillage or tank cleaning should be disposed of in accordance with prevailing regulations, preferably to a recognised collector or contractor.
It is the responsibility of the waste generator to determine the toxicity and physical properties of the material generated to determine the proper waste classification and disposal methods in compliance with applicable regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Product classified as per Work Health Safety Regulations – Implementation of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) 2012 and SDS prepared as per national model code of practice for preparation of safety data sheet for Hazardous chemicals 2020 based on Globally Harmonized Classification version 7.
The regulatory information is not intended to be comprehensive. Other regulations may apply to this material.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Shell Turbo Oil T 32?
The signal word is no signal word.
What is the physical form of Shell Turbo Oil T 32?
Shell Turbo Oil T 32 is a liquid appearing as liquid at room temperature. with colourless to pale amber color. It has data not available odor.
What is Shell Turbo Oil T 32 used for?
Turbine oil.
What are the hazard statements for Shell Turbo Oil T 32?
This substance has 3 hazard statements:
- PHYSICAL HAZARDS: Not classified as a physical hazard under GHS criteria.
- HEALTH HAZARDS: Not classified as a health hazard under GHS criteria.
- ENVIRONMENTAL HAZARDS: Not classified as an environmental hazard under GHS criteria.
What is the melting point of Shell Turbo Oil T 32?
The melting point is Data not available and the boiling point is > 280 °C / 536 °F estimated value(s).