SHELL TURBO OIL T 46

Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Rinse nose and mouth with water. Get medical attention if any discomfort continues.

Remove affected person from source of contamination. Remove contaminated clothing. Wash skin thoroughly with soap and water. Get medical attention promptly if symptoms occur after washing.

Symptoms: Oil acne. The product contains a small amount of sensitising substance. May cause an allergic skin reaction.

Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15 minutes. Get medical attention promptly if symptoms occur after washing.

Symptoms: May cause temporary eye irritation.

Rinse mouth thoroughly with water. Do not induce vomiting. If vomiting occurs, the head should be kept low so that stomach vomit doesn't enter the lungs. Get medical attention if any discomfort continues.

Symptoms: Nausea, vomiting. Diarrhoea.

Extinguish with alcohol-resistant foam, carbon dioxide, dry powder or water fog.

Do not use water jet as an extinguisher, as this will spread the fire.

Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapours.

In case of spills, beware of slippery floors and surfaces. Follow precautions for safe handling described in this safety data sheet. Avoid inhalation of vapours and contact with skin and eyes.

Avoid discharge into water courses or onto the ground.

In case of spills, beware of slippery floors and surfaces. Absorb spillage with non-combustible, absorbent material. Collect and place in suitable waste disposal containers and seal securely.

Materials: non-combustible, absorbent material

Avoid spilling. Avoid inhalation of vapours and contact with skin and eyes. Take precautionary measures against static discharge. Ground/bond container and receiving equipment.

Store in tightly-closed, original container in a dry, cool and well-ventilated place. Store at room temperature.

Take precautionary measures against static discharge. Ground/bond container and receiving equipment.

Provide adequate ventilation. Observe Occupational Exposure Limits and minimise the risk of inhalation of vapours.

Chemical-resistant, impervious gloves complying with an approved standard should be worn if a risk assessment indicates skin contact is possible. The most suitable glove should be chosen in consultation with the glove supplier/manufacturer, who can provide information about the breakthrough time of the glove material. It is recommended that gloves are made of the following material: Polyvinyl chloride (PVC). Neoprene. Nitrile rubber. (>0.35mm coating thickness) Breakthrough time for gloves >480 min. EN 374

Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible. Unless the assessment indicates a higher degree of protection is required, the following protection should be worn: Wear chemical splash goggles. EN 166

If ventilation is inadequate, suitable respiratory protection must be worn. Gas filter, type A EN 136/140/145/143/149

Wear appropriate clothing to prevent any possibility of liquid contact and repeated or prolonged vapour contact.

Stable at normal ambient temperatures.

Stable at normal ambient temperatures and when used as recommended.

The following materials may react with the product: Strong oxidising agents.

Avoid exposure to high temperatures or direct sunlight.

Strong oxidising agents.

Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapours.

Waste should be treated as controlled waste. Do not puncture or incinerate, even when empty.

Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.