Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- POTASSIUM FORMATE 75%
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Raw material for industry
Manufacturers & Suppliers
Synthomer (UK) Limited
manufacturer
Central Road, Temple Fields, Harlow, Essex, CM20 2BH
+44 1279 436211
Emergency Contacts
Emergency Contact
01235 239670
Emergency Contact
+44 (0)1865 407333
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
No hazardous ingredients
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If skin irritation persists, call a physician. If on skin, rinse well with water. If on clothes, remove clothes.
Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Standard procedure for chemical fires.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wipe up with absorbent material (e.g. cloth, fleece).
Large spills should be collected mechanically (remove by pumping) for disposal.
Prevent further leakage or spillage if safe to do so.
Large spills should be collected mechanically (remove by pumping) for disposal. Wipe up with absorbent material (e.g. cloth, fleece).
Materials: absorbent material (e.g. cloth, fleece)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. For personal protection see section 8.
Keep in properly labeled containers. Keep container tightly closed in a dry and well-ventilated place.
Smoking, eating and drinking should be prohibited in the application area. When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Break through time : 480 min; Glove thickness : 0.1 - 0.4 mm; Directive : Equipment should conform to EN 374; Material : Nitrile rubber; Remarks : The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Eye wash bottle with pure water; Tightly fitting safety goggles
No personal respiratory protective equipment normally required.
Impervious clothing; Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and applied as directed.
No decomposition if stored and applied as directed.
No decomposition if stored and applied as directed.
Protect from frost, heat and sunlight.
Not applicable
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.1 Toxicity
No data available
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Other adverse effects
The substance/mixture does not contain components considered to have endocrine disrupting properties for environment according to UK REACH Article 57(f).
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of wastes in an approved waste disposal facility. Send to a licensed waste management company.
Dispose of wastes in an approved waste disposal facility. Send to a licensed waste management company.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Relevant EU provisions transposed through retained EU law
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for POTASSIUM FORMATE 75%?
The signal word is no signal word.
What is the physical form of POTASSIUM FORMATE 75%?
POTASSIUM FORMATE 75% is a liquid appearing as liquid with colorless color. It has slight odor.
What is POTASSIUM FORMATE 75% used for?
Raw material for industry
What is the melting point of POTASSIUM FORMATE 75%?
The melting point is -10 - 0 °C and the boiling point is 105 - 115 °C.