Chemart-7775

If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing.

Symptoms: Coughing

Wash with plenty of water.

Symptoms: skin irritation

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Symptoms: irritation

Call a POISON CENTER/doctor if you feel unwell. Do NOT induce vomiting. If vomiting occurs turn patient on side. Do not give milk or alcoholic beverages. Rinse mouth with water but do not swallow. Never give anything by mouth to an unconscious person.

Symptoms: Harmful if swallowed. Vomiting, Nausea, Diarrhoea

Direct water jet may spread the fire.

As appropriate for surrounding fire.

Fight fire with normal precautions from a reasonable distance. Keep containers cool by spraying with water if exposed to fire.

Ensure operatives are trained to minimise exposures. Ensure suitable personal protection during removal of spillages. Shut off leaks if without risk.

Allow small spillages to evaporate provided there is adequate ventilation.

Avoid release to the environment.

Adsorb spillages onto sand, earth or any suitable adsorbent material. Transfer to a container for disposal.

Ensure operatives are trained to minimise exposures. Do not breathe vapour. In case of inadequate ventilation wear respiratory protection. Avoid all contact. Do not ingest. If swallowed then seek immediate medical assistance. Wear protective gloves/eye protection.

Keep container tightly closed. Store in a cool/low-temperature, well-ventilated (dry) place away from heat and ignition sources.

Do not eat, drink or smoke when using this product. Wash hands before breaks and after work.

Store away from heat and ignition sources.

Ensure adequate ventilation. Store in a cool/low-temperature, well-ventilated (dry) place away from heat and ignition sources.

Wear suitable chemical resistant protective gloves for frequent or prolonged operations tested to EN374 with an acceptable permeation test. Contaminated gloves should be carefully rinsed with water before reuse. Breakthrough time of the glove material: refer to the information provided by the gloves' producer. Recommended: Prolonged, direct contact: Nitrile rubber Minimum thickness: 0.11mm) Protective index 6, corresponding > 480 minutes of permeation time according to EN 374. During splash contact: Nitrile rubber Minimum thickness: 1.11mm) Protective index 6, corresponding > 480 minutes of permeation time according to EN 374

Use eye protection according to EN 166, designed to protect against liquid splashes.

Respiratory protection is not necessary if room is well ventilated. In case of inadequate ventilation wear respiratory protection. A suitable mask with filter type A (EN141 or EN405) may be appropriate.

Wear suitable coveralls to prevent exposure to the skin.

Avoid release to the environment.

Stable under normal conditions.

Stable under normal conditions.

Risk of explosion: Forms flammable and explosive hydrogen through corrosion of metals (Aluminium), perchloric acid. Risk of ignition or formation of inflammable gases or vapors with: chromyl chloride, Strong oxidising agents. Exothermic reaction with alkalis. Strong exothermic reaction with acids.

Direct heat.

Strong oxidising agents, Strong acids and alkali. Nitric acid

Combustion may cause toxic fumes. (Carbon monoxide, Carbon dioxide).

Do not allow to enter drains, sewers or watercourses.

Dispose of this material and its container as hazardous waste.