Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DAPHNE HERMETIC OIL FD46XG-F
- Product Code
- E1604-FI-001
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
lubricant
Uses advised against
Not Applicable
Manufacturers & Suppliers
Idemitsu Lube Europe GmbH
manufacturer
Elberfelder Strasse 2, 40213 Duesseldorf, Germany
+49-211-175-4370
Idemitsu Lube Europe GmbH
distributor
Elberfelder Strasse 2, 40213 Duesseldorf, Germany
+49-211-175-4370
Emergency Contacts
Idemitsu Lube Europe GmbH
+49-211-175-4370
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapors or decomposition products.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes.
If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.
Immediate Medical Attention
Get medical attention immediately if symptoms occur. Seek medical advice immediately if swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, dry chemical, dry sand, alcohol-resistant foam.
Do NOT use straight streams
The product causes burns of eyes, skin and mucous membranes. Thermal decomposition can lead to release of irritating and toxic gases and vapors. In the event of fire and/or explosion do not breathe fumes.
Firefighter Protection
Wear self-contained breathing apparatus and protective suit. Use personal protective equipment as required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation, especially in confined areas.
Should not be released into the environment.
Take up mechanically, placing in appropriate containers for disposal. Clean contaminated surface thoroughly.
Materials: sand, earth or other non-combustible absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protective equipment as required. Avoid breathing vapors or mists.
Store at ambient conditions. Store in accordance with local regulations.
Wash contaminated clothing before reuse.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Wear protective nitrile rubber gloves. Thickness: not less than 0.3mm.
Tight sealing safety goggles.
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required. In case of inadequate ventilation wear respiratory protection.
Suitable protective clothing.
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No data available.
None under normal processing.
Strong oxidizing agents. Heat, flames and sparks.
No information available.
Thermal decomposition can lead to release of irritating and toxic gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Water hazard class 1 (slightly hazardous). Harmful to aquatic organisms.
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substance 2,6-Di-tert-butyl-p-cresol is assessed as Not Applicable for PBT and vPvB criteria.
12.6. Other adverse effects
No information available
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DAPHNE HERMETIC OIL FD46XG-F?
The signal word is warning.
What is the physical form of DAPHNE HERMETIC OIL FD46XG-F?
DAPHNE HERMETIC OIL FD46XG-F is a liquid appearing as clear with light yellow color. It has characteristic odor.
What is DAPHNE HERMETIC OIL FD46XG-F used for?
lubricant
What are the hazard statements for DAPHNE HERMETIC OIL FD46XG-F?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction
- H412: Harmful to aquatic life with long lasting effects