Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- INDUSTRENE® 2070; INDUSTRENE® 2070 KOSHER
- Product Code
- 40418, 40450
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
PMC Biogenix, Inc.
manufacturer
1231 Pope Street, Memphis, TN 38108, USA
PMC Ouvrie SAS
44, Rue Albert Einstein, 62220 Carvin, France
33 (0)3.91.83.71.71
Emergency Contacts
Chemtrec
+1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
Molten product can cause thermal burns. In case of burns, immediately cool affected skin for as long as possible with cold water. Wash off immediately with plenty of water for at least 15 minutes.
Molten product can cause thermal burns. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Molten product can cause thermal burns. Clean mouth with water and drink afterwards plenty of water.
Immediate Medical Attention
Get medical attention immediately if symptoms occur (Inhalation, Skin Contact, Ingestion). Call a physician if irritation persists (Eye contact).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Do not use a solid water stream as it may scatter and spread fire
Avoid creating dust. Dust can form an explosive mixture with air. Thermal decomposition can lead to release of irritating and toxic gases and vapors.
Firefighter Protection
Wear self-contained breathing apparatus and protective suit. Use personal protective equipment as required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent further leakage or spillage if safe to do so.
Use personal protective equipment as required. Take up mechanically, placing in appropriate containers for disposal. Clean contaminated surface thoroughly. Cover powder spill with plastic sheet or tarp to minimize spreading and keep powder dry. Avoid creating dust. Pick up and transfer to properly labeled containers. Where possible allow molten material to solidify naturally.
Related Products
Similar products with comparable safety profiles
GRINDSTED® MONO-DI R 40 KOSHER
---
GRINDSTED® MONO-DI R 40 LIQ KOSHER
---
INDUSTRY CLEANER, 365 g
---
INDUSTRIAL OIL (ERTVELDE)
---
C-899 Kosher MB (EU)
---
DIETHYLENE GLYCOL INDUSTRIAL
CAS: 111-46-6
ETHYLENE GLYCOL, INDUSTRIAL GRADE
CAS: 107-21-1
INDUSTRIAL HYDRAULIC OIL
CAS: Mixture
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid generation of dust. Handle in accordance with good industrial hygiene and safety practice.
Keep container tightly closed in a dry and well-ventilated place.
Handle in accordance with good industrial hygiene and safety practice.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Showers. Eyewash stations.
Heat resistant gloves are recommended when handling molten materials.
Wear safety glasses with side shields (or goggles).
Use certified respiratory protection equipment meeting EU requirements(89/656/EEC, 89/686/EEC ), or equivalent, when respiratory risks cannot be avoided or sufficiently limited by technical means of collective protection or by measures, methods or procedures of work organization.
Wear protective gloves and protective clothing.
Prevent product from entering drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No data available.
Hazardous polymerization does not occur. None under normal processing.
Avoid creating dust. Dust can form an explosive mixture with air. Extremes of temperature and direct sunlight.
Strong oxidizing agents.
None under normal use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
60 % of the mixture consists of component(s) of unknown hazards to the aquatic environment
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substance is not considered to be persistent, bioaccumulating nor toxic (PBT) or very persistent nor very bioaccumulating (vPvB).
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for INDUSTRENE® 2070; INDUSTRENE® 2070 KOSHER?
The signal word is no signal word.
What is the physical form of INDUSTRENE® 2070; INDUSTRENE® 2070 KOSHER?
INDUSTRENE® 2070; INDUSTRENE® 2070 KOSHER is a solid appearing as flakes, molten, pellets, powder with no information available color. It has no information available odor.
What is the melting point of INDUSTRENE® 2070; INDUSTRENE® 2070 KOSHER?
The melting point is 26 °C / 78 ºF and the boiling point is > 250 °C / 483 ºF.